Most techniques to prevent frost and ice formation on surfaces rely heavily on heating or liquid chemicals that need to be repeatedly reapplied because they easily wash away. Even advanced anti-icing materials have problems functioning under conditions of high humidity and subzero conditions, when frost and ice formation go into overdrive.
Now, researchers from the University of Illinois at Chicago College of Engineering describe for the first time several unique properties of materials known as phase-switching liquids, or PSLs, that hold promise as next-generation anti-icing materials. PSLs can delay ice and frost formation up to 300 times longer than state-of-the-art coatings being developed in laboratories. Their findings are published in the journal Advanced Materials.
“Ice and frost pose hazards to people and can damage machines and reduce functionality of some technologies, especially those related to energy and transportation, so we have been interested in finding possible ways to overcome their harmful effects, and phase-switching liquids are very promising candidates,” said Sushant Anand, assistant professor of mechanical and industrial engineering and corresponding author of the paper.
PSLs are a subset of phase change materials that have melting points higher than the freezing point of water, which is 0 degrees Celsius, meaning that they would be solids at a range of temperatures close to that at which water freezes. Examples of such materials include cyclohexane, cyclooctane, dimethyl sulfoxide, glycerol, and more.
“At sub-zero temperatures, all PSLs turn solid. So, on a winter day, you could coat a surface where you don’t want icing with a PSL material and it would remain there much longer than most deicing liquids, which demand frequent reapplication,” said Rukmava Chatterjee, a doctoral student in the UIC College of Engineering and the first author of the paper.
While researchers have known about phase change materials for a long time, their unique anti-icing and anti-frosting properties have not been investigated before, Chatterjee explained. Decades ago, Daniel Beysens, research director of the physics and mechanics of heterogeneous media laboratory at Université de recherche Paris Sciences et Lettres and a co-author on the paper, had observed that when materials like cyclohexane were cooled just below their melting points, water droplets condensing on the surface would move around erratically.
“We had looked into this erratic motion before, and we had shown that it originated from the melting of the cyclohexane induced by the heat released into these materials during water droplet condensation,” Anand said.
In their current research, Anand and Chatterjee cooled a range of PSLs to -15 degrees Celsius, rendering them all solid. Under high humidity conditions, they noticed that the solidified PSLs melted directly underneath and in the immediate vicinity of water droplets condensing on the PSLs.
“We were expecting that the erratic droplet motion would stop upon cooling the surface to -15C. But to our surprise, we found that the droplets kept on showing the same hopping motion even at very low temperatures,” Anand said. “It turns out that PSLs are extremely adept at trapping this released heat.
“This quality, combined with the fact that condensed water droplets become extremely mobile on these cooled PSLs means that the formation of frost is significantly delayed. Yes, at a certain point, ice does eventually form and that is inevitable, but some of the PSLs we tested are water soluble, and this contributes to their anti-freezing properties and can help delay ice formation much longer than even the advanced anti-icing coatings.”
Anand and Chatterjee saw the same frost delaying effect with the PSLs even when they were applied as extremely thin layers to objects.
“In our first set of experiments, the PSL coating we used was about 3 millimeters thick. But we also tested them as very thin coatings, like a film, and still saw the same freezing delay effect,” Anand said. “This means that we can potentially use PSLs to coat objects like car windshields or turbine blades without compromising the object’s functionality.”
In further experiments, the researchers found that PSLs have a wide range of optical transparencies, can self-repair after being scratched and can purge liquid-borne contaminants.
“The unique properties of PSLs, which we describe for the first time in this paper, make them excellent candidates for next-generation materials to prevent frost and ice development on surfaces,” Anand said.
Because PSLs are solids at low temperatures, he anticipates that they wouldn’t need to be applied as often as liquid anti-icing agents because they would have better staying power.
“But, of course, we need to conduct additional experiments to determine their limits and figure out if there are ways we can further maximize their ice/frost-repelling abilities,” he said.
The Latest on: Anti-icing materials
via Google News
The Latest on: Anti-icing materials
- Unexpected Growth Seen for Paint Additives Market by 2022 | Akzo Nobel NV, Arkema SA, Ashland Global Holdings, Incon February 22, 2021 at 9:36 pm
Future Market Insights (FMI) has offered a 5-year forecast for the global paint additives market in its new report titled “Paint Additives Market: Global Industry Analysis (2012-2016) and Opportunity ...
- Lucean Headen Was An Amazing Aviator And Innovator History Should Rememberon February 22, 2021 at 1:04 pm
History books are spilling over with people who have achieved seemingly impossible feats in their lifetime, but they often miss the awesome stories of many Black innovators. One of these people was ...
- Opinion: What would I do if I was mayor of Stamford?on February 19, 2021 at 11:30 am
As the municipal election season begins, and candidates announce their intentions, I would like to put forth a list of issues I feel need to be addressed by all candidates and ideas that will ...
- Self-responsive composite materials to reduce aerospace production costs, improve sustainabilityon February 19, 2021 at 8:00 am
We’re developing three main technologies: self-cure, self-anti-icing and self-sensing,” says Matthew Collinson, research engineer in the AMRC Composite Centre. The AMRC team is developing materials ...
- Live updates: Morning appointments at new mass vaccination site in Worcrester moved due to weatheron February 16, 2021 at 2:24 am
A mix of snow, rain and ice is here and roads will likely be slippery throughout the morning commute. Some changes at vaccination sites have been announced with appointments rescheduled for later in ...
- Live updates: Snow, rain and ice coming our wayon February 15, 2021 at 3:47 pm
A mix of snow, rain and ice will hit across Massachusetts on Monday and Tuesday. A coating of snow is possible in the Greater Boston area, but ice is more of the concern with one to two inches into ...
- The I-35W Fort Worth pileup investigation is focusing on deicing. What about speed?on February 12, 2021 at 6:29 am
Deicing and speed are the focus of elected leaders and safety experts after a 133-car pileup killed six people on I-35W in Fort Worth. State Sen. Kelly Hancock, R-North Richland HIlls, whose ...
- Hilltip Introduces IceStriker 1200-4200AM Combi Spreaders to the North American Marketon February 10, 2021 at 12:55 pm
but also can be transformed into a liquid deicing sprayer – either pre-wetting material as it’s spread or directly spraying brine to the driving surface for anti-icing applications.
- Low–interfacial toughness materials for effective large-scale deicingon February 2, 2021 at 4:00 pm
1 Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI, USA. 2 Biointerfaces Institute, University of Michigan, Ann Arbor, MI, USA. 3 Macromolecular Science and ...
- Road treatment typeson August 17, 2020 at 12:30 pm
There are 5 types of materials we use to treat the roads for snow and ice. Rock salt breaks up ice and prevents it from sticking to the pavement. It is widely available, effective, and inexpensive ...
via Bing News