Forget the laboratory, substances that can solve environmental problems by capturing carbon dioxide, decontaminating water and cleaning up pollutants can be easily created in a kitchen, a UNSW Sydney study shows.
In a paper published today in Nature Communications, UNSW chemical engineers shone a light on the mysterious world of liquid metals and their role as catalysts to speed up chemical processes using low amounts of energy.
Professor Kourosh Kalantar-Zadeh of UNSW’s School of Chemical Engineering says that “anyone with a shaker and a cooktop at home in their kitchen can make catalysts that can be used for CO2 conversion, cleaning water and other pollutants.
“They can do this by using a combination of liquid metals like gallium, indium, bismuth and tin in alloys that can be melted under 300ºC on a cooktop or in an oven.”
Professor Kalantar-Zadeh and colleague Dr Jianbo Tang showed that by heating an alloy of bismuth and tin, the metal melted at a point much lower than if you were to heat each metal individually. Substances that behave like this are said to be eutectic.
“Eutectic alloys are the mixes of metals that produce the lowest melting point at a particular combination,” says Dr Tang.
“For instance, if we combine bismuth at 57% and tin at 43% they melt at 139ºC. But by themselves, both bismuth and tin have melting points above 200ºC.”
Professor Kalantar-Zadeh says the specific mix ratio of eutectic substances produces the maximum natural chaos at the nano-level, which in turn brings the melting point down. The process can also work the other way. Eutectic metal substances already in liquid form can solidify at a single temperature below the usual freezing point of each metal.
“This maximum chaos helps, when we solidify the liquid metals, to naturally produce so many defects in the material that the ‘catalytic’ activity is significantly enhanced,” Professor Kalantar-Zadeh says.
How to make a liquid metal catalyst
Ingredients: a eutectic alloy, water
- Take your eutectic metal alloy and place in a saucepan on a high flame.
- When the metal melts, carefully pour it into a bottle of water and tighten the cap.
- Shake the liquid metal and water together to produce droplets of liquid metal in water. It will be similar to shaking oil and vinegar to produce droplets of oil in the vinegar.
- Let the droplets solidify into a powder. This can now be used as a catalyst for the electrochemical conversion of CO2.
Liquid metals and the environment
Liquid metal alloys can be used to remove or neutralise pollutants in the environment as well as capturing the carbon in CO2 emissions. Tin, gallium and bismuth when in liquid form can be used as electrodes to convert carbon dioxide into useful byproducts. Another environmental application is that after heating the liquid metals to make oxides, the substances can also be used to absorb energy from light, which enables them to break down contaminants in water.
What makes liquid metals an attractive option in solving environmental problems is the fact they can be cheaply produced using low energy and in a low-tech environment.
“Metals such as tin and bismuth are accessible to many people around the world,” says Professor Kalantar-Zadeh.
“People should just consider how easily, cheaply and with so little need for advanced technology that they can be processed and transformed into useful materials such as catalysts.
“Additionally, playing with liquid metals is fun. While the most famous liquid metal – mercury – is well known to be hazardous, a liquid metal like gallium is completely non-toxic, and meltable at or near room temperature, where we can use it to transform one material to another at very low input energies. Liquid metals could solve lots of problems that we as humans are grappling with these days.”
Learn more: Liquid metals the secret ingredients to clean up environment
The Latest on: Liquid metals
via Google News
The Latest on: Liquid metals
- SMM Morning Comments (Jan 15): Shanghai base metals were mostly higher as investors reacted to Biden's $1.9 trillion stimulus planon January 14, 2021 at 5:29 pm
Shanghai base metals were mostly higher on Friday morning as investors reacted to the release of US President-elect Joe Biden's $1.9 trillion coronavirus rescue package. Meanwhile, their counterparts ...
- Liquid Nitrogen Market Analysis, Trends, Growth, Size, Share and Forecast 2020 to 2026on January 13, 2021 at 11:46 pm
The liquid nitrogen market size is projected to grow from USD 12.48 Billion in 2015 to USD 16.50 Billion by 2024, at a ...
- Metal Powder Market Size Surpass Around US$ 8.52 Bn by 2027on January 12, 2021 at 11:03 am
The metal powder market size is predicted to surpass around US$ 8.52 billion by 2027 and growing at impressive CAGR of 6.19% over forecast period 2020 to 2027. OTTAWA, Jan. 11, 2021 (GLOBE NEWSWIRE) - ...
- Lenovo Legion gaming laptops add liquid metal, next-gen Ryzen and GeForce chipson January 12, 2021 at 9:00 am
Lenovo's Legion 5, Legion 7, Legion 5 Pro and Legion Slim 7 will pair AMD's newest Ryzen laptop CPU with Nvidia's newest GeForce GPUs.
- FMG, Kawasaki & Iwatani Form Liquid Hydrogen Consortiumon January 12, 2021 at 3:26 am
Fortescue Metals Group has signed a Memorandum of Understanding with Kawasaki Heavy Industries and Iwatani Corporation to develop a business model for the supply of liquid hydrogen into Japan. Under ...
- LIQUID TENSION EXPERIMENT (DREAM THEATER) Announces First New Album in 22 Yearson January 11, 2021 at 9:49 am
Liquid Tension Experiment has finally announced their long-awaited reunion album, LTE3. The album will be out on March 26 and will be their first new effort since LTE2 in 1999. As always, Liquid ...
- Liquid metal ink liberates formon January 11, 2021 at 9:27 am
Today's electronic devices strive for new form factors—to make them foldable, stretchable, and deformable. To produce such devices that are highly stretchable or deformable, it is necessary to develop ...
- Yonsei University joint research team develops liquid metal ink for 3D circuit lineson January 10, 2021 at 4:09 am
Today’s electronic devices strive for new form factors*1 – to make them foldable, stretchable, and deformable. To produce such devices that are highly stretchable or deformable, it is necessary to ...
- Gold And Precious Metals In The Spotlight: 2020 Recapon January 7, 2021 at 12:20 pm
It was a banner year for the yellow metal, hitting a new record high of $2,070 an ounce in August, as investors sought a reliable store of value in the face of unprecedented money-printing.
- Neither liquid nor solidon January 5, 2021 at 7:35 am
Discovery of liquid glass sheds light on the old scientific problem of the glass transition: An interdisciplinary team of researchers has uncovered a new state of matter, liquid glass, with previously ...
via Bing News