UC Berkeley engineers have created a new way to remove contaminants from storm water, potentially addressing the needs of water-stressed communities that are searching for ways to tap the abundant and yet underused source of fresh drinking water.
Using a mineral-coated sand that reacts with and destroys organic pollutants, the researchers have discovered that the engineered sand could help purify storm water percolating into underground aquifers, creating a safe and local reservoir of drinking water for parched communities.
“The way we treat storm water, especially in California, is broken. We think of it as a pollutant, but we should be thinking about it as a solution,” said Joseph Charbonnet, a graduate student in civil and environmental engineering at UC Berkeley. “We have developed a technology that can remove contamination before we put it in our drinking water in a passive, low-cost, non-invasive way using naturally-occurring minerals.”
As rain water rushes over our roofs, lawns and streets, it can pick up a slew of nasty chemicals such as herbicides, pesticides, toxic metals, car oil and even dog poop. Excess storm water can also overwhelm sewer systems and flood streets and basements. Not surprisingly, cities often discharge this polluted water into neighboring rivers and streams as quickly as possible.
Directing storm water through sand into underground aquifers may be an ideal solution for gathering water in cities with Mediterranean climates like Los Angeles, Charbonnet said. Like giant rain barrels, aquifers can be filled during periods of intense rainfall and then store water until it is needed in the dry season.
Cities are already using storm water reclamation on smaller scales through constructs such as bioswales and rain gardens, which funnel storm water through sand or mulch to remove debris and prevent surface runoff. In the Sun Valley neighborhood of Los Angeles, Charbonnet and his adviser, David Sedlak, are working with the local community to transform a 46-acre gravel pit into a wetland and water infiltration system for storm water.
“Before we built the buildings, roads and parking lots that comprise our cities, rainwater would percolate into the ground and recharge groundwater aquifers,” said Sedlak, professor of civil and environmental engineering at UC Berkeley and co-director of the Berkeley Water Center. “As utilities in water stressed regions try to figure out how to get urban storm water back into the ground, the issue of water quality has become a major concern. Our coated sands represent an inexpensive, new approach that can remove many of the contaminants that pose risks to groundwater systems where storm water is being infiltrated.”
Although the coated sand doesn’t remove all types of contaminants, it may be used in conjunction with other water purification systems to remove many of the contaminants that water picks up, Sedlak said.
The team details the finding Aug. 30 in the journal Environmental Science & Technology.
Borrowing chemistry from the soil
To create the coated sand, Charbonnet mixed plain sand with two forms of manganese that react to form manganese oxide. This harmless mineral binds to organic chemicals such as herbicides, pesticides, and the endocrine-disrupting bisphenol-A (BPA) and breaks them down into smaller pieces that are usually less toxic and more biodegradable.
“Manganese oxides are something that soil scientists identified 30 or 40 years ago as having these really interesting properties, but we are one of the first groups to use it in engineered ways to help unlock this water source,” Charbonnet said.
The manganese oxide-coated sand, which is a dull brown color, is safe and environmentally friendly. “I guarantee that you have some manganese oxide on your shoe right now because it is ubiquitous in the soil,” Charbonnet said.
Charbonnet tested the sand by percolating simulated storm water, which contained a low concentration of BPA, through columns of the material. The coated sand initially removed nearly all of the BPA, but lost its effectiveness over time. However, the manganese oxide could be “recharged” by bathing the sand in a solution containing a low concentration of chlorine. Recharging the sand restored all of the manganese oxide’s initial reactivity.
“If you have to come in every year or two and dig up this sand and replace it, that is incredibly labor intensive, so in order to make this useful for community stakeholders it’s really important that this stuff can be regenerated in place,” Charbonnet said.
Charbonnet estimates that it would take about two days to recharge a half-meter-deep layer of sand using 25 parts per million of chlorine in water, the concentration used to treat wastewater.
In the next phase of the experiment, the team is performing field tests in Sonoma County using storm water from a local creek.
Learn more: Engineered sand zaps storm water pollutants
The Latest on: Water treatment
via Google News
The Latest on: Water treatment
- Water rate increase proposed for Allegany County residentson May 15, 2021 at 10:54 am
Residents who receive water and sewer services from Allegany County will likely see a 9% rate increase beginning July 1. The Allegany County Board of Commissioners was presented a proposal Thursday ...
- Juvenile taken into custody in connection with stabbing behind Water Street parking deck in downtown Napervilleon May 15, 2021 at 9:40 am
A juvenile has been arrested in connection with a stabbing that took place Friday in an alley behind the Water Street parking deck, near Webster Street, Naperville police said.
- New treatment system beats many water-purity filterson May 15, 2021 at 1:10 am
Getting pure water is a bear. I've tried everything. Recently, a company sent me a new reverse osmosis system that sits in a small space on my counter. It's called Aquibear.
- Pinellas County Water Treatment To Be Modifiedon May 14, 2021 at 6:53 pm
The method of water treatment used by Pinellas County Utilities and the city of Clearwater will be temporarily modified during two short-term changes this year. This short-term change from chloramines ...
- Millis eyes multimillion dollar water treatment plant to clean drinking wateron May 14, 2021 at 11:28 am
A group of man-made chemicals called per- and polyfluoroalkyl substances, abbreviated to PFAS, have been linked to a variety of health issues.
- Global Fracking Water Treatment Systems Market Outlook, Industry Analysis and Prospect 2021-2026on May 14, 2021 at 6:05 am
The Fracking Water Treatment Systems market report provides a detailed analysis of global market size, regional ...
- Monroe announces temporary changes in the city's water treatmenton May 13, 2021 at 11:34 am
The City of Monroe is in the process of temporarily changing how the city's drinking water is treated. According to a news release from the city, the distribution system disinfectant is changing from ...
- Water Treatment Systems Market Size by Production, Top Countries Import-Export and Consumption Forecast & Regional Analysis by 2026on May 12, 2021 at 1:09 am
(The Expresswire) -- "Final Report will add the analysis of the impact of COVID-19 on this industry.” Global “Water Treatment Systems ...
- Ballast Water Treatment Systems (BWTS) Market to Expand at a Healthy CAGR of 10% through 2030on May 11, 2021 at 12:13 am
The market intelligence report for the Ballast Water Treatment Systems (BWTS) Market serves a platter of important features containing the product taxonomy, critical explanations, and other ...
- Wastewater treatment system recovers electricity, filters wateron May 10, 2021 at 6:48 am
He's lab has developed one system that recovers both, filtering wastewater while creating electricity. Results from bench-scale trials were published in and featured as a front cover article in the ...
via Bing News