Technique can capture a scene at multiple depths with one shutter click — no zoom lens needed.
MIT researchers have developed novel photography optics that capture images based on the timing of reflecting light inside the optics, instead of the traditional approach that relies on the arrangement of optical components. These new principles, the researchers say, open doors to new capabilities for time- or depth-sensitive cameras, which are not possible with conventional photography optics.
Specifically, the researchers designed new optics for an ultrafast sensor called a streak camera that resolves images from ultrashort pulses of light. Streak cameras and other ultrafast cameras have been used to make a trillion-frame-per-second video, scan through closed books, and provide depth map of a 3-D scene, among other applications. Such cameras have relied on conventional optics, which have various design constraints. For example, a lens with a given focal length, measured in millimeters or centimeters, has to sit at a distance from an imaging sensor equal to or greater than that focal length to capture an image. This basically means the lenses must be very long.
In a paper published in this week’s Nature Photonics, MIT Media Lab researchers describe a technique that makes a light signal reflect back and forth off carefully positioned mirrors inside the lens system. A fast imaging sensor captures a separate image at each reflection time. The result is a sequence of images — each corresponding to a different point in time, and to a different distance from the lens. Each image can be accessed at its specific time. The researchers have coined this technique “time-folded optics.”
“When you have a fast sensor camera, to resolve light passing through optics, you can trade time for space,” says Barmak Heshmat, first author on the paper. “That’s the core concept of time folding. … You look at the optic at the right time, and that time is equal to looking at it in the right distance. You can then arrange optics in new ways that have capabilities that were not possible before.”
The new optics architecture includes a set of semireflective parallel mirrors that reduce, or “fold,” the focal length every time the light reflects between the mirrors. By placing the set of mirrors between the lens and sensor, the researchers condensed the distance of optics arrangement by an order of magnitude while still capturing an image of the scene.
In their study, the researchers demonstrate three uses for time-folded optics for ultrafast cameras and other depth-sensitive imaging devices. These cameras, also called “time-of-flight” cameras, measure the time that it takes for a pulse of light to reflect off a scene and return to a sensor, to estimate the depth of the 3-D scene.
Co-authors on the paper are Matthew Tancik, a graduate student in the MIT Computer Science and Artificial Intelligence Laboratory; Guy Satat, a PhD student in the Camera Culture Group at the Media Lab; and Ramesh Raskar, an associate professor of media arts and sciences and director of the Camera Culture Group.
Folding the optical path into time
The researchers’ system consists of a component that projects a femtosecond (quadrillionth of a second) laser pulse into a scene to illuminate target objects. Traditional photography optics change the shape of the light signal as it travels through the curved glasses. This shape change creates an image on the sensor. But, with the researchers’ optics, instead of heading right to the sensor, the signal first bounces back and forth between mirrors precisely arranged to trap and reflect light. Each one of these reflections is called a “round trip.” At each round trip, some light is captured by the sensor programed to image at a specific time interval — for example, a 1-nanosecond snapshot every 30 nanoseconds.
A key innovation is that each round trip of light moves the focal point — where a sensor is positioned to capture an image — closer to the lens. This allows the lens to be drastically condensed. Say a streak camera wants to capture an image with the long focal length of a traditional lens. With time-folded optics, the first round-trip pulls the focal point about double the length of the set of mirrors closer to the lens, and each subsequent round trip brings the focal point closer and closer still. Depending on the number of round trips, a sensor can then be placed very near the lens.
By placing the sensor at a precise focal point, determined by total round trips, the camera can capture a sharp final image, as well as different stages of the light signal, each coded at a different time, as the signal changes shape to produce the image. (The first few shots will be blurry, but after several round trips the target object will come into focus.)
In their paper, the researchers demonstrate this by imaging a femtosecond light pulse through a mask engraved with “MIT,” set 53 centimeters away from the lens aperture. To capture the image, the traditional 20-centimeter focal length lens would have to sit around 32 centimeters away from the sensor. The time-folded optics, however, pulled the image into focus after five round trips, with only a 3.1-centimeter lens-sensor distance.
This could be useful, Heshmat says, in designing more compact telescope lenses that capture, say, ultrafast signals from space, or for designing smaller and lighter lenses for satellites to image the surface of the ground.
Multizoom and multicolor
The researchers next imaged two patterns spaced about 50 centimeters apart from each other, but each within line of sight of the camera. An “X” pattern was 55 centimeters from the lens, and a “II” pattern was 4 centimeters from the lens. By precisely rearranging the optics — in part, by placing the lens in between the two mirrors — they shaped the light in a way that each round trip created a new magnification in a single image acquisition. In that way, it’s as if the camera zooms in with each round trip. When they shot the laser into the scene, the result was two separate, focused images, created in one shot — the X pattern captured on the first round trip, and the II pattern captured on the second round trip.
The researchers then demonstrated an ultrafast multispectral (or multicolor) camera. They designed two color-reflecting mirrors and a broadband mirror — one tuned to reflect one color, set closer to the lens, and one tuned to reflect a second color, set farther back from the lens. They imaged a mask with an “A” and “B,” with the A illuminated the second color and the B illuminated the first color, both for a few tenths of a picosecond.
When the light traveled into the camera, wavelengths of the first color immediately reflected back and forth in the first cavity, and the time was clocked by the sensor. Wavelengths of the second color, however, passed through the first cavity, into the second, slightly delaying their time to the sensor. Because the researchers knew which wavelength would hit the sensor at which time, they then overlaid the respective colors onto the image — the first wavelength was the first color, and the second was the second color. This could be used in depth-sensing cameras, which currently only record infrared, Heshmat says.
One key feature of the paper, Heshmat says, is it opens doors for many different optics designs by tweaking the cavity spacing, or by using different types of cavities, sensors, and lenses. “The core message is that when you have a camera that is fast, or has a depth sensor, you don’t need to design optics the way you did for old cameras. You can do much more with the optics by looking at them at the right time,” Heshmat says.
This work “exploits the time dimension to achieve new functionalities in ultrafast cameras that utilize pulsed laser illumination. This opens up a new way to design imaging systems,” says Bahram Jalali, director of the Photonics Laboratory and a professor of electrical and computer engineering at the University of California at Berkeley. “Ultrafast imaging makes it possible to see through diffusive media, such as tissue, and this work hold promise for improving medical imaging in particular for intraoperative microscopes.”
The Latest on: Time-folded optics
[google_news title=”” keyword=”time-folded optics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Time-folded optics
- Step Back in Time with the JollyBook Eye Selling for Huge Discounton November 29, 2023 at 6:12 pm
Capture timeless memories with the JollyBook Eye, a retro-digital camera is now selling for a real steal deal. Checkout to know more: ...
- Blind Navy Vet Takes Cops to Court Over ‘Bogus’ Arreston November 27, 2023 at 1:27 pm
A legally blind U.S. Navy veteran who was jailed overnight last year after cops mistook his mobility cane for a handgun, is now suing the two officers who locked him up—one of whom was demoted over ...
- Official: OnePlus 12 will launch early next monthon November 27, 2023 at 12:14 pm
Unleash the power of OnePlus with the upcoming OnePlus 12. Stay tuned for its global launch and get ready to be amazed!
- Apple, it’s time to foldon November 6, 2023 at 12:02 pm
including the Samsung Galaxy Fold 5 and the Google Pixel Fold. I’ve had the chance to spend some time with both of the latter recently, and my time with those, along with the very strong ...
- What is a periscope camera lens, and how does it work?on November 5, 2023 at 4:00 pm
Periscope lens is also called folded lens to reference the folded optics principles behind their functioning. A folded optic system refers to setups that send light on an optical trajectory longer ...
- Time Fold, The Last Fold: Volume 3 - Softcoveron October 18, 2023 at 9:54 pm
Now the government is involved, and Max becomes a person of interest. Suddenly an investigator shows up at his doorstep looking for him...and the Time Fold. "synopsis" may belong to another edition of ...
- Demand for optics ‘at an all-time high’, reports LightCountingon August 15, 2020 at 1:52 pm
but nevertheless represents “an all-time high” for the industry, the market research firm said (see LightCounting: new high for component vendor revenues and LightCounting: advanced optics boost 2016 ...
- Time Division Multiplexers (TDM) Informationon February 11, 2018 at 6:37 am
Time division multiplexers (TDM ... transmission at extremely high bandwidths and allows very long transmission distances. Multimode fiber optic cable supports the propagation of multiple modes.
- Sony DSC-T700 Opticson June 18, 2017 at 3:53 am
This distortion is unfortunately fairly common in ultra-compact cameras like the T700 with their "folded optic" lenses, so the T700 isn't too unusual in its class in this regard, but this ...
- Sony DSC-T30 Opticson April 9, 2015 at 8:03 pm
Like other members of the T-series, the Sony T30 uses "folded optics" to tuck a zoom lens entirely inside the camera body. This means there's no fragile telescoping lens mechanism extending beyond ...
via Bing News