Sandia, University of California project aimed at reducing cost of hydrogen fuel cells
Replacing your everyday gas guzzler with a hydrogen fueled car could drastically reduce your carbon footprint. So why don’t we all make the switch?
One of reasons we don’t is the expensive platinum catalyst required to operate hydrogen fuel cells efficiently.
Research led by Sandia National Laboratories and the University of California, Merced aimed at bringing down the cost of hydrogen fuel cells used a dirt-cheap compound to create an uneven surface that resembles a plant’s leaves. The additional area helps catalyze hydrogen almost as efficiently as platinum.
Lead researchers Stanley Chou, a Sandia materials scientist, and UC Merced’s Vincent Tung have applied for a joint patent for the spray-printing process, which uses inexpensive molybdenum disulfide. The increased surface area of the rippling “leaf” creates three times as many catalytic contact points as other molybdenum disulfide structures, and the new creation can handle higher temperatures than platinum without sintering and gumming up the cell.
The work is part of an effort to more cheaply power hydrogen-fueled cars, desirable because they emit water rather than carbon monoxide or carbon dioxide.
Nature as an ally
The production method uses nature as an ally rather than a hindrance, Chou said. “In traditional thinking, forces such as gravity, viscosity and surface tension must be overcome to achieve the manufactured shapes you desire. We thought, instead of thinking these forces as limitations, why not use them to do something useful? So, we did.”
Tung said the method uses natural processes to produce materials for extremely inexpensive fuel cell terminals to liberate hydrogen. “The printing process also allows for continued deposition, with the ability to scale for industry,” he said.
The team mixed molybdenum disulfide with water and used the printing process to expel micron-size droplets into an enclosed area about 2 feet high. As they dropped, the droplets first separated into nanoscopic subunits. These dried further as they fell, their shrinking volume producing an uneven 3-D surface much like the leaves of plants, with tiny ridges, hills, canals, caves and tunnels. Landing on a substrate and on each other, the “leaves” were still moist enough to bond as though attached at critical points by tiny droplets of glue. Thus, the nanostructures did not lose their individuality but instead, by maintaining their identities, created tiny tunnels within and between them that permitted extraordinary access for atoms of hydrogen to seek their freedom from chemical bonds.
The inspiration for creating a bio-inspired 3-D form arose from studying the cuticle folding process, a mechanism used by plants for controlling diffusion and permeability on leaf surfaces, Chou said.
“We see our catalyst as an inorganic material acting like a plant. The nanostructures, like leaves, are varied in shape, with tiny rises and falls,” he said. “The structures take in an external material to produce hydrogen rather than oxygen, and one day may be powered by sunlight.” Right now, very low-voltage electricity does the job.
Doubts about the strength of structure formed in such a serendipitous manner, Tung recounted, were settled when a 170-pound student unwittingly trod upon one of the first molybdenum disulfide-catalyst creations when it accidentally fell to the floor. A few hundred nanometers thick, it rested upon a centimeter-square carbon substrate but was otherwise unprotected. Elecromicroscopic investigation showed the tiny structure to be undamaged. The “leaves” also have proved to be long lasting, continuing to produce hydrogen for six months.
Learn more: Superior hydrogen catalyst just grows that way
The Latest on: Hydrogen catalyst
- James Cropper targets hydrogen economy with PV3 buyon January 19, 2021 at 7:09 pm
James Cropper has boosted its Technical Fibre Products wing with the acquisition of a specialist manufacturer of electrochemical materials.
- BioSolar Expands Green Hydrogen Technology Focuson January 19, 2021 at 2:16 am
A mature technology that has existed for over 200 years, electrolyzers are systems typically installed behind a solar farm or wind farm that use renewable electricity to split water into hydrogen and ...
- 10 Best Hydrogen Fuel Cell Stocks To Buy Nowon January 18, 2021 at 1:23 pm
In this article we discuss 10 best hydrogen fuel cell stocks to buy now. Clean energy stocks are gaining a lot of attention these days, but it ...
- How To Light A Fuse Under The Green Hydrogen Economyon January 18, 2021 at 5:40 am
If the hydrogen economy is to complete its promise, the technology has to reach scale. Given the political will right now, that's doable in the nearer term.
- Sculpted light could control chemical catalysts, shows Stanford studyon January 16, 2021 at 4:47 pm
Like a person breaking up a cat fight, the role of catalysts in a chemical reaction is to hurry up the process – and come out of it intact. And, just as not every house in a neighborhood has someone ...
- Giving the hydrogen economy an acid teston January 15, 2021 at 11:10 am
Scientists show that the effectiveness of hydrogen-producing metal catalysts protected by graphene depends on the ability of protons to penetrate into the inner metallic surface. This work may lead to ...
- Engineers find a way to control chemical catalysts with sculpted lighton January 15, 2021 at 10:43 am
Like a person breaking up a cat fight, the role of catalysts in a chemical reaction is to hurry up the process—and come out of it intact. And, just as not every house in a neighborhood has someone ...
- Stanford engineers find a way to control chemical catalysts with sculpted lighton January 15, 2021 at 6:38 am
Using state-of-the-art fabrication and imaging, researchers watched the consequences of adding sculpted light to a catalyst during a chemical transformation. This work could inform more efficient – ...
- Increasing the Activity of Catalystson January 12, 2021 at 8:28 pm
On the surface of an electrode, it doubles the amount of water split in an electrolysis system without increasing the energy requirements.
- Tweaking one layer of atoms on a catalyst's surface can make it work betteron January 11, 2021 at 11:58 am
When an LNO catalyst with a nickel-rich surface carries out a water-splitting reaction, its surface atoms rearrange from a cubic to a hexagonal pattern and its efficiency doubles. Deliberately ...
via Google News and Bing News