Sandia, University of California project aimed at reducing cost of hydrogen fuel cells
Replacing your everyday gas guzzler with a hydrogen fueled car could drastically reduce your carbon footprint. So why don’t we all make the switch?
One of reasons we don’t is the expensive platinum catalyst required to operate hydrogen fuel cells efficiently.
Research led by Sandia National Laboratories and the University of California, Merced aimed at bringing down the cost of hydrogen fuel cells used a dirt-cheap compound to create an uneven surface that resembles a plant’s leaves. The additional area helps catalyze hydrogen almost as efficiently as platinum.
Lead researchers Stanley Chou, a Sandia materials scientist, and UC Merced’s Vincent Tung have applied for a joint patent for the spray-printing process, which uses inexpensive molybdenum disulfide. The increased surface area of the rippling “leaf” creates three times as many catalytic contact points as other molybdenum disulfide structures, and the new creation can handle higher temperatures than platinum without sintering and gumming up the cell.
The work is part of an effort to more cheaply power hydrogen-fueled cars, desirable because they emit water rather than carbon monoxide or carbon dioxide.
Nature as an ally
The production method uses nature as an ally rather than a hindrance, Chou said. “In traditional thinking, forces such as gravity, viscosity and surface tension must be overcome to achieve the manufactured shapes you desire. We thought, instead of thinking these forces as limitations, why not use them to do something useful? So, we did.”
Tung said the method uses natural processes to produce materials for extremely inexpensive fuel cell terminals to liberate hydrogen. “The printing process also allows for continued deposition, with the ability to scale for industry,” he said.
The team mixed molybdenum disulfide with water and used the printing process to expel micron-size droplets into an enclosed area about 2 feet high. As they dropped, the droplets first separated into nanoscopic subunits. These dried further as they fell, their shrinking volume producing an uneven 3-D surface much like the leaves of plants, with tiny ridges, hills, canals, caves and tunnels. Landing on a substrate and on each other, the “leaves” were still moist enough to bond as though attached at critical points by tiny droplets of glue. Thus, the nanostructures did not lose their individuality but instead, by maintaining their identities, created tiny tunnels within and between them that permitted extraordinary access for atoms of hydrogen to seek their freedom from chemical bonds.
The inspiration for creating a bio-inspired 3-D form arose from studying the cuticle folding process, a mechanism used by plants for controlling diffusion and permeability on leaf surfaces, Chou said.
“We see our catalyst as an inorganic material acting like a plant. The nanostructures, like leaves, are varied in shape, with tiny rises and falls,” he said. “The structures take in an external material to produce hydrogen rather than oxygen, and one day may be powered by sunlight.” Right now, very low-voltage electricity does the job.
Doubts about the strength of structure formed in such a serendipitous manner, Tung recounted, were settled when a 170-pound student unwittingly trod upon one of the first molybdenum disulfide-catalyst creations when it accidentally fell to the floor. A few hundred nanometers thick, it rested upon a centimeter-square carbon substrate but was otherwise unprotected. Elecromicroscopic investigation showed the tiny structure to be undamaged. The “leaves” also have proved to be long lasting, continuing to produce hydrogen for six months.
Learn more: Superior hydrogen catalyst just grows that way
The Latest on: Hydrogen catalyst
- India needs Hydrogen partnership with Japan for clean energy goal, says envoyon April 20, 2021 at 12:24 pm
India should have a strategic partnership with Japan on Hydrozen that would help the country in its plan to have clean and green ...
- SoCalGas and H2U Technologies Partner to Test New Technology that May Make Green Hydrogen at Dramatically Lower Coston April 20, 2021 at 10:25 am
so the ability to store it by producing green hydrogen will be crucial," said Jim Disanto, H2U Technologies board chairman. "We're excited to advance our electrolyzer technologies and new catalysts ...
- Novel perovskite catalyst for lower CO2 emissionson April 20, 2021 at 7:38 am
Perovskites have so far been used for solar cells, as anode materials or electronic components rather than for their catalytic properties. Now scientists have succeeded in producing a special ...
- New catalyst for lower carbon dioxide emissionson April 20, 2021 at 5:55 am
If the CO2 content of the atmosphere is not to increase any further, carbon dioxide must be converted into something else. However, as CO2 is a very stable molecule, this can only be done with the ...
- Nanofilm to dip into hydrogen economy with vacuum coating technologyon April 20, 2021 at 4:32 am
Nanofilm Technologies has signed an agreement with Temasek to jointly invest in Sydrogen Energy and tap into the lucrative hydrogen economy using unique vacuum coating technologies. With the joint ...
- Microwave methane reforming for low carbon hydrogenon April 20, 2021 at 3:32 am
In a paradigm shift away from conventional reforming processes and post-combustion CCUS, Nu:ionic, a start-up based in Atlantic Canada, has a new take on hydrogen production.
- Immortal hydrogen consortium gains powerful new members for fuel cell techon April 20, 2021 at 1:00 am
The participants will be working together to develop the H2 technology for heavy-duty trucks. The Immortal hydrogen consortium, a major collaboration in Europe ...
- New catalyst for lower CO2 emissionson April 19, 2021 at 9:00 pm
Perovskites have so far been used for solar cells, as anode materials or electronic components rather than for their catalytic properties. Now scientists at TU Wien have succeeded in producing a ...
- Finding What Makes Catalysts Tickon April 19, 2021 at 11:00 am
She is one of several researchers who identify catalysts that can store energy from intermittent energy sources like solar or wind power. Her work has focused on ammonia oxidation, oxygen reduction, ...
- Costs challenge the hydrogen transformationon April 19, 2021 at 9:32 am
Green hydrogen promises to make the most of renewable energy ... partly due to problems of scaling up the size of the cells and because of its reliance on precious-metal catalysts – not so much ...
via Google News and Bing News