New design could dramatically cut energy waste in electric vehicles, data centers, and the power grid.
Power electronics, which do things like modify voltages or convert between direct and alternating current, are everywhere. They’re in the power bricks we use to charge our portable devices; they’re in the battery packs of electric cars; and they’re in the power grid itself, where they mediate between high-voltage transmission lines and the lower voltages of household electrical sockets.
Power conversion is intrinsically inefficient: A power converter will never output quite as much power as it takes in. But recently, power converters made from gallium nitride have begun to reach the market, boasting higher efficiencies and smaller sizes than conventional, silicon-based power converters.
Commercial gallium nitride power devices can’t handle voltages above about 600 volts, however, which limits their use to household electronics.
At the Institute of Electrical and Electronics Engineers’ International Electron Devices Meeting this week, researchers from MIT, semiconductor company IQE, Columbia University, IBM, and the Singapore-MIT Alliance for Research and Technology, presented a new design that, in tests, enabled gallium nitride power devices to handle voltages of 1,200 volts.
That’s already enough capacity for use in electric vehicles, but the researchers emphasize that their device is a first prototype manufactured in an academic lab. They believe that further work can boost its capacity to the 3,300-to-5,000-volt range, to bring the efficiencies of gallium nitride to the power electronics in the electrical grid itself.
That’s because the new device uses a fundamentally different design from existing gallium nitride power electronics.
“All the devices that are commercially available are what are called lateral devices,” says Tomás Palacios, who is an MIT professor of electrical engineering and computer science, a member of the Microsystems Technology Laboratories, and senior author on the new paper. “So the entire device is fabricated on the top surface of the gallium nitride wafer, which is good for low-power applications like the laptop charger. But for medium- and high-power applications, vertical devices are much better. These are devices where the current, instead of flowing through the surface of the semiconductor, flows through the wafer, across the semiconductor. Vertical devices are much better in terms of how much voltage they can manage and how much current they control.”
For one thing, Palacios explains, current flows into one surface of a vertical device and out the other. That means that there’s simply more space in which to attach input and output wires, which enables higher current loads.
For another, Palacios says, “when you have lateral devices, all the current flows through a very narrow slab of material close to the surface. We are talking about a slab of material that could be just 50 nanometers in thickness. So all the current goes through there, and all the heat is being generated in that very narrow region, so it gets really, really, really hot. In a vertical device, the current flows through the entire wafer, so the heat dissipation is much more uniform.”
Narrowing the field
Although their advantages are well-known, vertical devices have been difficult to fabricate in gallium nitride. Power electronics depend on transistors, devices in which a charge applied to a “gate” switches a semiconductor material — such as silicon or gallium nitride — between a conductive and a nonconductive state.
For that switching to be efficient, the current flowing through the semiconductor needs to be confined to a relatively small area, where the gate’s electric field can exert an influence on it. In the past, researchers had attempted to build vertical transistors by embedding physical barriers in the gallium nitride to direct current into a channel beneath the gate.
But the barriers are built from a temperamental material that’s costly and difficult to produce, and integrating it with the surrounding gallium nitride in a way that doesn’t disrupt the transistor’s electronic properties has also proven challenging.
Palacios and his collaborators adopt a simple but effective alternative. The team includes first authors Yuhao Zhang, a postdoc in Palacios’s lab, and Min Sun, who received his MIT PhD in the Department of Electrical Engineering and Computer Science (EECS) last spring; Daniel Piedra and Yuxuan Lin, MIT graduate students in EECS; Jie Hu, a postdoc in Palacios’s group; Zhihong Liu of the Singapore-MIT Alliance for Research and Technology; Xiang Gao of IQE; and Columbia’s Ken Shepard.
Rather than using an internal barrier to route current into a narrow region of a larger device, they simply use a narrower device. Their vertical gallium nitride transistors have bladelike protrusions on top, known as “fins.” On both sides of each fin are electrical contacts that together act as a gate. Current enters the transistor through another contact, on top of the fin, and exits through the bottom of the device. The narrowness of the fin ensures that the gate electrode will be able to switch the transistor on and off.
“Yuhao and Min’s brilliant idea, I think, was to say, ‘Instead of confining the current by having multiple materials in the same wafer, let’s confine it geometrically by removing the material from those regions where we don’t want the current to flow,’” Palacios says. “Instead of doing the complicated zigzag path for the current in conventional vertical transistors, let’s change the geometry of the transistor completely.”
Learn more: Device makes power conversion more efficient
The Latest on: Gallium nitride power devices
- Mobility And 5G Drive Adoption Of New Materials For Power Deviceson January 21, 2021 at 12:58 am
The power electronics industry is transitioning from silicon to wide bandgap compound semiconductor materials such as silicon carbide and gallium nitride.
- Worldwide Gallium Nitride Semiconductor Device Market Forecast, 2020-2025: The COVID-19 Data Bump and the Future of Data Growthon January 20, 2021 at 2:42 am
Gallium nitride (GaN) is a binary III/V direct bandgap semiconductor commonly used in light-emitting diodes. GaN has the potential to reduce energy loss of the power devices; it possesses high ...
- Bel Power Solutions and Transphorm Announce Family of Titanium Efficiency AC to DC Power Supplieson January 19, 2021 at 10:00 am
Transphorm's high voltage GaN devices are used in six of Bel ... GaN: Revolutionizing Data Center Power Gallium nitride power converters offer fundamental advantages compared to Silicon (Si ...
- DuoX quick charging 120W USB-C GaN chargeron January 19, 2021 at 5:35 am
Utilizing dual Gallium Nitride (GaN) cores and dual transformers ... the maximum output power is 120W and can charge two devices simultaneously. It is also compatible with most devices on the ...
- Bel Power Solutions and Transphorm Announce Family of Titanium Efficiency AC to DC Power Supplieson January 19, 2021 at 4:51 am
Bel Power's TET Series power supplies from 1.5 to 3.2 kW use Transphorm's GaN to deliver Titanium-level efficiency power conversion to data centers.
- Gallium Nitride Market, Business Trends, Global Segments, Business Opportunities, Industry Profit Growth and Forecast to 2023on January 19, 2021 at 2:22 am
Gallium Nitride Market Analysis The global gallium nitride market is predicted to grow at a healthy CAGR between 2016- ...
- Building a Better On-Board EV Charger with Gallium Nitrideon January 16, 2021 at 4:00 pm
Steve Tom manages the gallium nitride (GaN) product line within Texas Instruments’ (TI) High Voltage Power business unit ... Steve Tom: GaN has superior device properties compared to existing ...
- Development of a new technique for growing high-quality gallium nitride crystalson December 23, 2020 at 7:30 am
Gallium nitride crystals are a promising material for the development of next-generation power semiconductor devices. NIMS and the Tokyo Tech developed a technique for growing high-quality GaN ...
- Gallium Nitride Market Size To Be Worth USD 320.4 Million by 2027 Growing at a CAGR of 20.8%| Emergen Researchon December 14, 2020 at 2:17 pm
making it appropriate for use in automotive power electronics applications, including cockpit wireless charging, EV charging, and LiDAR sensing, among others. Gallium nitride devices with faster ...
- [email protected]: What is Gallium Nitride (GaN) and how can it replace silicon?on December 13, 2020 at 5:45 pm
Once touted as the revolutionary technology that would replace silicon as it had a wider bandgap and better performance ratio, Gallium ... so these devices are more power-efficient and lose ...
via Google News and Bing News