Imagine a bottle of laundry detergent that can sense when you’re running low on soap — and automatically connect to the internet to place an order for more.
University of Washington researchers are the first to make this a reality by 3-D printing plastic objects and sensors that can collect useful data and communicate with other WiFi-connected devices entirely on their own.
With CAD models that the team is making available to the public, 3-D printing enthusiasts will be able to create objects out of commercially available plastics that can wirelessly communicate with other smart devices. That could include a battery-free slider that controls music volume, a button that automatically orders more cornflakes from Amazon or a water sensor that sends an alarm to your phone when it detects a leak.
“Our goal was to create something that just comes out of your 3-D printer at home and can send useful information to other devices,” said co-lead author and UW electrical engineering doctoral student Vikram Iyer. “But the big challenge is how do you communicate wirelessly with WiFi using only plastic? That’s something that no one has been able to do before.”
The system is described in a paper presented Nov. 30 at the Association for Computing Machinery’s SIGGRAPH Conference and Exhibition on Computer Graphics and Interactive Techniques in Asia.
To 3-D print objects that can communicate with commercial WiFi receivers, the team employed backscatter techniques that allow devices to exchange information. In this case, the team replaced some functions normally performed by electrical components with mechanical motion activated by springs, gears, switches and other parts that can be 3-D printed — borrowing from principles that allow battery-free watches to keep time.
Backscatter systems use an antenna to transmit data by reflecting radio signals emitted by a WiFi router or other device. Information embedded in those reflected patterns can be decoded by a WiFi receiver. In this case, the antenna is contained in a 3-D printed object made of conductive printing filament that mixes plastic with copper.
Physical motion — pushing a button, laundry soap flowing out of a bottle, turning a knob, removing a hammer from a weighted tool bench — triggers gears and springs elsewhere in the 3-D printed object that cause a conductive switch to intermittently connect or disconnect with the antenna and change its reflective state.
Information — in the form of 1s and 0s — is encoded by the presence or absence of the tooth on a gear. Energy from a coiled spring drives the gear system, and the width and pattern of gear teeth control how long the backscatter switch makes contact with the antenna, creating patterns of reflected signals that can be decoded by a WiFi receiver.
“As you pour detergent out of a Tide bottle, for instance, the speed at which the gears are turning tells you how much soap is flowing out. The interaction between the 3-D printed switch and antenna wirelessly transmits that data,” said senior author Shyam Gollakota, an associate professor in the Paul G. Allen School of Computer Science & Engineering. “Then the receiver can track how much detergent you have left and when it dips below a certain amount, it can automatically send a message to your Amazon app to order more.”
The team from the UW Networks & Mobile Systems Lab 3-D printed several different tools that were able to sense and send information successfully to other connected devices: a wind meter, a water flow meter and a scale. They also printed a flow meter that was used to track and order laundry soap, and a test tube holder that could be used for either managing inventory or measuring the amount of liquid in each test tube.
They also 3-D printed WiFi input widgets such as buttons, knobs and sliders that can be customized to communicate with other smart devices in the home and enable a rich ecosystem of “talking objects” that can seamlessly sense and interact with their surroundings.
Using a different type of 3-D printing filament that combines plastic with iron, the team also leveraged magnetic properties to invisibly encode static information in 3-D printed objects — which could range from barcode identification for inventory purposes or information about the object that tells a robot how to interact with it.
“It looks like a regular 3-D printed object but there’s invisible information inside that can be read with your smartphone,” said Allen School doctoral student and co-lead author Justin Chan.
The Latest Bing News on:
3-D printing plastic objects and sensors
- Design with Digital Technology: 3D Printing Opens New Possibilities in Chinaon June 18, 2021 at 1:06 am
It is a technology that uses powdered metal or plastic and other bondable materials to construct objects by printing ... “Mobile Platform of Robotic 3-D Printing in Concrete” contains a ...
- Scientists develop lightweight tactile sensors that could pave the way for robot 'skins' and medical deviceson June 17, 2021 at 6:15 am
NTU Singapore scientists develop lightweight ultra-sensitive tactile sensors that could pave the way for robot 'skins' and medical devices ...
- ExOne Metal 3D Printing Adoption Center Surpasses 2 Million Parts, Adds New Systems for Stainless Steel Part Productionon June 16, 2021 at 6:19 am
Adoption center runs 24-7 with 28 metal 3D printers. Two X1 25Pro systems now dedicated to stainless steel parts. X1 Metal 420i™ remains a top-seller.
- 3D Printing Process Combines Plastic and Metalon June 15, 2021 at 5:00 pm
where a team has developed a metal-plastic hybrid 3D printing technique that fabricates plastic objects with an adhesive metal coating on defined areas. The approach, which uses a printer with a dual ...
- Stratasys expands full-colour 3D printing offering with hardware and software launcheson June 15, 2021 at 4:30 am
Stratasys has announced the launch of two new full-colour PolyJet 3D printing systems and two software products for users in the packaging and research fields.
- 3D Printing Process Creates Objects Made of Both Liquid and Solid Materialson June 14, 2021 at 5:01 pm
Typical plastic 3D printing processes turn liquids into solids. Now researchers have invented a way to integrate materials directly into the process to fabricate an object with both solid and liquid ...
- Need a DIY project? Here' s how to modify a 3D printer to make food or ceramics new researchon June 10, 2021 at 11:17 pm
While the pandemic has restricted us from doing many activities we like, household hobbies such as DIY , baking and crafts have become more popular. Now there's a way to combine all of these skills to ...
- A Crash Sensor For Delta 3D Printerson June 5, 2021 at 5:00 pm
but this is the last time that [Lucas] comes back from hours of unattended 3D printing to find a large portion of plastic spaghetti mess and a partly disassembled Kossel. The crash sensor he ...
- What is 3D printing? Understanding the technology that's changing the way we manufacture everyday objectson June 2, 2021 at 5:00 pm
What 3D printing is used for If you can dream up an object, especially if it's plastic, you are likely able to 3D print it. Think toys, jewelry, models, phone cases, molds, and more. There are ...
- 3-D Printer Formlabs Raises $150 Million in SoftBank-Led Fundingon May 19, 2021 at 6:16 am
Formlabs Inc., a 3-D printing company ... allow customers to print digital objects ranging from jewelry to dental retainers using about 30 different types of plastic materials.
The Latest Google Headlines on:
3-D printing plastic objects and sensors
The Latest Bing News on:
- Backscatter Your Own FM Pirate Radio Stationon June 16, 2021 at 5:00 pm
Frequency-modulating this backscatter carrier frequency adds audio (or data) to the product station. One of the cooler tricks that they pull off with this system is to inject a second (stereo ...
- backscatter radaron June 13, 2021 at 5:00 pm
But what is a phased array antenna system? How do they work? With the help of 1024 LEDs we’ll show you.
- Technology Notebook: Solid-state backscatter technology boosts film-gauging performanceon June 9, 2021 at 5:00 pm
Data collection and report generation is accomplished through an integrated data collection and management system. Cost comparisons between various backscatter gauges must address the total cost of ...
- Assistive Objects Can Track Their Own Useon June 7, 2021 at 5:00 pm
Instead, they use what’s called backscatter to transmit information—technology ... and other devices, she said. “This system will give us a higher-fidelity picture of what is going on,” she said. “For ...
- Standardizing Access Mechanisms to Prevent Medical Equipment Supply Chain Disruptionon June 3, 2021 at 10:39 am
The industry can draw lessons from other manufacturing segments that use standardization as a key foundation for their system design and manufacturing philosophy.
- NASA lidar uses HOEs for lightweight scanningon May 31, 2021 at 4:59 pm
The photon-counting data system uses a single Geiger-mode silicon avalanche-photodiode detector. The scan controller can be used in point-and-stare, eight-position step-stare, and continuous-scan ...
- Deep-Implantable Blood-Oxygen Sensor Blends Multiple Sophisticated Technologieson May 31, 2021 at 4:59 pm
The system merges multiple technologies for sensing ... The reflected ultrasound backscatter from the sensor’s piezocrystal is captured by the same external piezo transducer and digitized ...
- ACM recognizes far-reaching technical achievements with special awardson May 25, 2021 at 9:17 pm
Gollakota defined the technology referred to today as ambient backscatter--a mechanism by ... receive the ACM Software System Award for Berkeley DB, which was an early exemplar of the NoSQL ...
- AS&E Lands Order from Middle Eastern Client for X-ray Detection Systemon May 10, 2021 at 5:00 pm
A breakthrough in X-ray detection technology, AS&E's Z Backscatter Van is a low-cost, highly mobile screening system built into a commercially available delivery van. The ZBV allows for immediate ...