Adding bits of irradiated plastic water bottles could cut cement industry’s carbon emissions.
Discarded plastic bottles could one day be used to build stronger, more flexible concrete structures, from sidewalks and street barriers, to buildings and bridges, according to a new study.
MIT undergraduate students have found that, by exposing plastic flakes to small, harmless doses of gamma radiation, then pulverizing the flakes into a fine powder, they can mix the irradiated plastic with cement paste and fly ash to produce concrete that is up to 15 percent stronger than conventional concrete.
Concrete is, after water, the second most widely used material on the planet. The manufacturing of concrete generates about 4.5 percent of the world’s human-induced carbon dioxide emissions. Replacing even a small portion of concrete with irradiated plastic could thus help reduce the cement industry’s global carbon footprint.
Reusing plastics as concrete additives could also redirect old water and soda bottles, the bulk of which would otherwise end up in a landfill.
“There is a huge amount of plastic that is landfilled every year,” says Michael Short, an assistant professor in MIT’s Department of Nuclear Science and Engineering. “Our technology takes plastic out of the landfill, locks it up in concrete, and also uses less cement to make the concrete, which makes fewer carbon dioxide emissions. This has the potential to pull plastic landfill waste out of the landfill and into buildings, where it could actually help to make them stronger.”
The team includes Carolyn Schaefer ’17 and MIT senior Michael Ortega, who initiated the research as a class project; Kunal Kupwade-Patil, a research scientist in the Department of Civil and Environmental Engineering; Anne White, an associate professor in the Department of Nuclear Science and Engineering; Oral Büyüköztürk, a professor in the Department of Civil and Environmental Engineering; Carmen Soriano of Argonne National Laboratory; and Short. The new paper appears in the journal Waste Management.
“This is a part of our dedicated effort in our laboratory for involving undergraduates in outstanding research experiences dealing with innovations in search of new, better concrete materials with a diverse class of additives of different chemistries,” says Büyüköztürk, who is the director of Laboratory for Infrastructure Science and Sustainability. “The findings from this undergraduate student project open a new arena in the search for solutions to sustainable infrastructure.”
An idea, crystallized
Schaefer and Ortega began to explore the possibility of plastic-reinforced concrete as part of 22.033 (Nuclear Systems Design Project), in which students were asked to pick their own project.
“They wanted to find ways to lower carbon dioxide emissions that weren’t just, ‘let’s build nuclear reactors,’” Short says. “Concrete production is one of the largest sources of carbon dioxide, and they got to thinking, ‘how could we attack that?’ They looked through the literature, and then an idea crystallized.”
The students learned that others have tried to introduce plastic into cement mixtures, but the plastic weakened the resulting concrete. Investigating further, they found evidence that exposing plastic to doses of gamma radiation makes the material’s crystalline structure change in a way that the plastic becomes stronger, stiffer, and tougher. Would irradiating plastic actually work to strengthen concrete?
To answer that question, the students first obtained flakes of polyethylene terephthalate — plastic material used to make water and soda bottles — from a local recycling facility. Schaefer and Ortega manually sorted through the flakes to remove bits of metal and other debris. They then walked the plastic samples down to the basement of MIT’s Building 8, which houses a cobalt-60 irradiator that emits gamma rays, a radiation source that is typically used commercially to decontaminate food.
“There’s no residual radioactivity from this type of irradiation,” Short says. “If you stuck something in a reactor and irradiated it with neutrons, it would come out radioactive. But gamma rays are a different kind of radiation that, under most circumstances, leave no trace of radiation.”
The team exposed various batches of flakes to either a low or high dose of gamma rays. They then ground each batch of flakes into a powder and mixed the powders with a series of cement paste samples, each with traditional Portland cement powder and one of two common mineral additives: fly ash (a byproduct of coal combustion) and silica fume (a byproduct of silicon production). Each sample contained about 1.5 percent irradiated plastic.
Once the samples were mixed with water, the researchers poured the mixtures into cylindrical molds, allowed them to cure, removed the molds, and subjected the resulting concrete cylinders to compression tests. They measured the strength of each sample and compared it with similar samples made with regular, nonirradiated plastic, as well as with samples containing no plastic at all.
They found that, in general, samples with regular plastic were weaker than those without any plastic. The concrete with fly ash or silica fume was stronger than concrete made with just Portland cement. And the presence of irradiated plastic along with fly ash strengthened the concrete even further, increasing its strength by up to 15 percent compared with samples made just with Portland cement, particularly in samples with high-dose irradiated plastic.
The concrete road ahead
After the compression tests, the researchers went one step further, using various imaging techniques to examine the samples for clues as to why irradiated plastic yielded stronger concrete.
The team took their samples to Argonne National Laboratory and the Center for Materials Science and Engineering (CMSE) at MIT, where they analyzed them using X-ray diffraction, backscattered electron microscopy, and X-ray microtomography. The high-resolution images revealed that samples containing irradiated plastic, particularly at high doses, exhibited crystalline structures with more cross-linking, or molecular connections. In these samples, the crystalline structure also seemed to block pores within concrete, making the samples more dense and therefore stronger.
“At a nano-level, this irradiated plastic affects the crystallinity of concrete,” Kupwade-Patil says. “The irradiated plastic has some reactivity, and when it mixes with Portland cement and fly ash, all three together give the magic formula, and you get stronger concrete.”
“We have observed that within the parameters of our test program, the higher the irradiated dose, the higher the strength of concrete, so further research is needed to tailor the mixture and optimize the process with irradiation for the most effective results,” Kupwade-Patil says. “The method has the potential to achieve sustainable solutions with improved performance for both structural and nonstructural applications.”
Going forward, the team is planning to experiment with different types of plastics, along with various doses of gamma radiation, to determine their effects on concrete. For now, they have found that substituting about 1.5 percent of concrete with irradiated plastic can significantly improve its strength. While that may seem like a small fraction, Short says, implemented on a global scale, replacing even that amount of concrete could have a significant impact.
“Concrete produces about 4.5 percent of the world’s carbon dioxide emissions,” Short says. “Take out 1.5 percent of that, and you’re already talking about 0.0675 percent of the world’s carbon dioxide emissions. That’s a huge amount of greenhouse gases in one fell swoop.”
“This research is a perfect example of interdisciplinary multiteam work toward creative solutions, and represents a model educational experience,” Büyüköztürk says.
This story has been updated to clarify that concrete containing both irradiated plastic and fly ash, rather than with irradiated plastic alone, is stronger, by up to 15 percent, compared to conventional concrete.
The Latest on: Concrete
- Budget 2021: North of England 'sick of announcements without concrete action', says shadow chancelloron October 24, 2021 at 2:10 am
Rachel Reeves says the North is "sick of announcements" without "concrete action to match the rhetoric of the government".
- Peter Pichler completes angular concrete-and-glass villa in Italian vineyardon October 24, 2021 at 2:00 am
The folded form of this villa, designed by Peter Pichler Architecture for the owners of a South Tyrol vineyard, is intended to merge with the existing landscape.
- Alto residents organize opposition to proposed concrete batch plant. Lincoln County Commission passes resolution backing them.on October 23, 2021 at 8:39 am
Lincoln County Commissioners earlier this month passed a resolution in support of an outspoken group of Alto residents who are trying to stop a concrete plant from opening in their community. “The ...
- Surfside Champlain Towers South Condo Collapse & the Science of Concrete [Video]on October 22, 2021 at 5:13 pm
Concrete buildings don’t just collapse out of the blue. Even earthquakes aren’t supposed to bring them down. So why did the Champlain Towers South building in Surfside, Florida — a modern structure ...
- U.S. 3D Concrete Printing Industry to 2026 - Key Drivers, Restraints, Opportunities and Challenges - ResearchAndMarkets.comon October 22, 2021 at 6:53 am
The “3D Concrete Printing Market Research Report by Technique, Concrete Type, Product Type, Sector, and State - United States Forecast to 2026 - Cumulative Impact of COVID-19” report has been added to ...
- Concrete Pulverizer Market Will Create Highest Returns by 2027 along with COVID-19 Analysis | Caterpillar, Kencoon October 22, 2021 at 12:05 am
This Concrete Pulverizer market report research examines objective market information and demonstrates how to use the correct business intelligence to uncover high potential market opportunities Our ...
- Global Concrete Industry Releases Road Map to Net-Zero Carbonon October 21, 2021 at 5:15 am
In the age of Google, road maps are pretty much obsolete. So it's fitting that the concrete industry is so big on road maps. While it is not obsolete, it is facing an existential carbon crisis, with ...
- Precast Concrete Market 2021: Industry Size, Regions, Emerging Trends, Growth Insights, Development Scenario, Opportunities, and Forecast By 2027on October 21, 2021 at 12:37 am
Precast Concrete Market 2021 2027 Research Report provides a detailed analysis of global precast concrete industry competition driving forces trends opportunities challenges risks sales channels ...
- A concrete plan to decarbonize cementon October 20, 2021 at 10:02 am
It’s Wednesday, October 20, and an industry that pollutes a ton finally announced a climate goal. For the first time, the cement industry announced a concrete goal to decarbonize. The roadmap, ...
- Global Concrete Saw Market | Analysis By Top Countries Data | By Top Players and By Types, By Applications | Forecast Till 2026on October 20, 2021 at 1:27 am
In 2021, “Concrete Saw Market“ revenue was Million USD in 2016, grew to Million USD in 2021, and will reach Million USD ...
via Google News and Bing News