The dream of research and development on liquid-repellents is a structure that has robust liquid repellency, strong mechanical stability, and is inexpensive to produce on a commercial scale.
On liquid-repellent surfaces, liquid droplets bounce away instead of being stuck. These surfaces are important in many fields, such as water-repellent clothes and anti-fouling kitchenware. Used as drag-reduction coatings for water vehicles, these surfaces can even help with speeding up cargo ships and military equipment so as to save energy. The dream of research and development on liquid-repellents is a structure that has robust liquid repellency, strong mechanical stability, and is inexpensive to produce on a commercial scale. However, the functional outcomes of existing liquid-repellent surfaces have not been satisfactory, because of inadequacies of conventional structural design and fabrication approaches in engineering microstructures and properties of such surfaces.
The challenge was recently overcome by breakthrough research led by Professor Wang Liqiu at the Department of Mechanical Engineering, Faculty of Engineering, the University of Hong Kong (HKU) through the development of a robust liquid-repellent structure and the fabrication of porous surfaces by an innovative microfluidic-droplet-based technique. Materials such as textiles, metals, and glasses covered by a layer of this robust porous surface can then become liquid-repellent. The paper was recently published in academic journal Nature Communications (Zhu P. A., Kong T. T., Tang X. and Wang L. Q. 2017. Well-defined porous membranes for robust omniphobic surfaces via microfluidic emulsion templating, Nature Communications 8, 15823). With the new technology developed by the team, clothes would never get wet on rainy days in the future.
The team resolves effectively the conflict between liquid-repellency and mechanical stability by the springtail-cuticle-inspired design of liquid-repellent structures. Springtails are soil-dwelling arthropods whose habitats often experience rain and flooding. As a consequence, springtails evolve their cuticles with strong mechanical durability and robust liquid repellency to resist friction from soil particles and to survive in watery environments, respectively. Inspired by springtail cuticles, the research team designed porous surfaces composed of interconnected honeycomb-like micro-cavities with a re-entrant profile: interconnectivity ensures mechanical stability and re-entrant structure yields robust liquid-repellency.
Figure 1 Soil-dwelling springtails with dew (body length: ~2.5 mm).
*For the press using this photo, please credit Brian Valentine.
Figure 2 Bio-inspired design of liquid-repellent structures with robust liquid-repellency.
Schematic (a) and image (b) of the designed porous surface. (c) Photo of a water drop suspended on top of the porous surface. (d) repellency of 10 different liquids by the porous surface.
Robust liquid-repellent structure shows a 21-fold enhancement in mechanical stability
The robust liquid-repellent surfaces repel at least 10 types of liquid, including water, surfactant solutions, oils, and organic solvents (Figure 2d) and show an astounding over 21-fold enhancement in mechanical stability compared with discrete structures (Figure 3). The porous surfaces are capable of recovering their non-wetting state as well even if micro-cavities are partially wetted by water. The flexible surfaces can also be readily coated onto various objects for liquid-repellency.
Figure 3 Bio-inspired design of liquid-repellent structures with enhanced mechanical stability.
(a) Intact structure of interconnected porous surface.
(b) Intact discrete structure.
(c-d) Damaged interconnected structures at (c) 8.6 kPa (kilopascal, the unit of pressure) and (d)11.5 kPa respectively.
(e-f) Damaged discrete structures at (e) 0.4 kPa and (f)2.9 kPa respectively.
Porous surface material just costs about HKD1 per square metre
The research team also developed an innovative microfluidic-droplet-based technique for the fabrication of porous surfaces which is very much similar to shaped-cookies made by baking molds. Here the molds are uniform micron-sized droplets that are produced by microfluidics technology with precise control over their size, structure, and composition. Molded by microfluidic droplets, commercial-scale uniform microstructures are produced at low cost. The material cost is in a range of HKD 0.7 to 1.3 per square metre, only one thousandth of that in purchasing commercialized products such as PTFE water-repellent film. This technique has high accuracy and effectiveness in engineering surface structures, ensured by the precision and controllability of microfluidic-droplet generation that is low in cost and readily scaled up as well.
Figure 4 Fabrication of bioinspired liquids-repellent surfaces by microfluidic method.
(a) Process of microfluidic fabrication method, involving emulsion deposition, solvent evaporation, and template removal.
(b) Droplet assemblies after emulsion deposition. (c) Dry film after solvent evaporation.
(d) Porous surface after template removal. (e-f) Images of porous surfaces with different pore sizes.
(g) Transparency of porous surfaces. (h) Wafer-scale fabrication of the porous surface.
The breakthrough will change the way liquid-repellent surfaces are fabricated for robust liquid-repellency, strong mechanical stability, and economical production at a commercial scale. It has also paved the way for further progress in creating surface structures by design, and in tailoring their morphology, repellency and mechanical stability to suit a desired application in various fields, including energy, buildings, automobiles, chemical engineering, electronics, environments, bio-medical industry, advanced manufacturing, water vehicle and military equipment.
The Latest on: Liquid-repellent surfaces
- Controlling the breakup of toroidal liquid films on solid surfaceson April 14, 2021 at 6:02 am
We use dielectrowetting to produce the initial ring-shaped filament of electrically insulating liquid on the normally liquid repellent surface. We study the dynamics and resultant breakup modes of ...
- This Intimates Brand Sold Over 85,000 Pairs of Underwear at Its Last Warehouse Sale — Now It’s Backon April 13, 2021 at 9:02 am
If your underwear drawer is overdue for an update, this Knix Warehouse sale has you covered (literally). Underwear is definitely a hot ticket item during this sale — the brand sold over 85,000 ...
- Colloquium of the SPP 2171on April 5, 2021 at 5:00 pm
In recent years, a lot of research went into exploring different strategies to achieve long-lasting and highly liquid-repellent surfaces. This research resulted in a greatly improved understanding on ...
- Bioinspired Structures and Designon April 2, 2021 at 1:49 am
Master simple to advanced biomaterials and structures with this essential text. Featuring topics ranging from bionanoengineered materials to bio-inspired structures for spacecraft and bio-inspired ...
- 'Climbing droplets' could lead to more efficient water harvestingon March 24, 2021 at 4:59 pm
Liquid-repellent surface maximizes water harvest and transport More information: Zongqi Guo et al, Hydrophilic slippery surface enabled coarsening effect for rapid water harvesting, Cell Reports ...
- Manufacturing Bits: March 10on March 9, 2021 at 4:00 pm
which has a liquid-repellent coating. Then, ultraviolet light is used. This, in turn, etches away the coating in the shape of the final particles. All told, this process enables the fabrication of a ...
- Top 5 unusual applications of NeverWeton March 7, 2021 at 4:00 pm
As the name implies, NeverWet is a liquid repellent that can be applied to just about anything ... “When a drop of liquid hits a surface, the angle formed between the edge of the drop and the surface ...
- Melinda Myers: Plant in fall for a colorful spring displayon October 23, 2020 at 2:17 pm
Lay the bulbs out on newspaper, apply the liquid repellent, and allow them to dry before planting. Add an extra layer of protection by sprinkling the granular repellent over the soil surface. In ...
- Research Projectson August 17, 2020 at 2:26 pm
Development of inherently super liquid repellent surfaces and fibers to provide the Soldier with self-cleaning clothing and safety in chemical and viral/bacterial contaminated environments. Exploring ...
- 2.5 Nano-engineered frictionon August 14, 2020 at 4:30 am
In a different achievement, researchers have developed the first nano/micro-textured highly slippery surfaces able to outperform lotus leaf-inspired liquid repellent coatings, particularly in ...
via Google News and Bing News