
Chemical Engineering Journal / Yiqi Yang
Conventionally prepared bioplastic fibers before (top left) and after (bottom left) being exposed to moisture, as compared with thermally treated fibers before (near right) and after (far right) the same process.
Introducing a simple step to the production of plant-derived, biodegradable plastic could improve its properties while overcoming obstacles to manufacturing it commercially, says new research from the University of Nebraska-Lincoln and Jiangnan University.
That step? Bringing the heat.
Nebraska’s Yiqi Yang and colleagues found that raising the temperature of bio-plastic fibers to several hundred degrees Fahrenheit, then slowly allowing them to cool, greatly improved the bio-plastic’s normally lackluster resistance to heat and moisture.
Its thermal approach also allowed the team to bypass solvents and other expensive, time-consuming techniques typically needed to manufacture a commercially viable bio-plastic, the study reported.
Yang said the approach could allow manufacturers of corn-derived plastic – such as a Cargill plant in Blair – to continuously produce the biodegradable material on a scale that at least approaches petroleum-based plastic, the industry standard. Recent research estimates that about 90 percent of U.S. plastic goes unrecycled.
“This clean technology makes possible (the) industrial-scale production of commercializable bio-based plastics,” the authors reported.
Not easy being green
The approach uses polylactic acid, or polylactide, a component of biodegradable plastic that can be fermented from corn starch, sugarcane and other plants. Though most plastics are made from petroleum, polylactide has emerged as an environmentally friendlier alternative.
Yet polylactide’s susceptibility to heat and moisture, particularly during the manufacturing process, has limited its use in textiles and other industries. In searching for ways to address the issue, researchers long ago discovered that mixing mirror-image polylactide molecules – generally referred to as “L” and “D” – could yield stronger molecular interactions and better performance than using just the L or D alone.
But there was another catch. Convincing a reasonable proportion of the L and D molecules to permanently pair up is difficult, often forcing researchers to concoct costly and complicated matchmaking schemes. Some of the most common involve the use of solvents or other chemical agents whose disposal can cause environmental issues of their own.
“The problem is that people couldn’t find a way to make it work so that you could use it on large scales,” said Yang, Charles Bessey Professor of biological systems engineering and of textiles, merchandising and fashion design. “People use nasty solvent or other additives. But those are not good for continuous production.
“We don’t want to dissolve the polymers and then try to evaporate the solvents, and then have to consider reusing them. That’s just too expensive (and) not realistic.”
Heating up
Yang and his colleagues decided to pursue another approach. After mixing pellets of the L and D polylactide and spinning them into fibers, the team rapidly heated them to as hot as 400 degrees Fahrenheit.
The resulting bio-plastic resisted melting at temperatures more than 100 degrees higher than did plastics containing only the L or D molecules. It also maintained its structural integrity and tensile strength after being submersed in water at more than 250 degrees, approximating the conditions that bio-plastics must endure when being incorporated into dyed textiles.
The textile industry produces about 100 million tons of fibers annually, Yang said, meaning that a feasible green alternative to petroleum-based manufacturing could pay off both environmentally and financially.
“So we just used a cheap way that can be applied continuously, which is a big part of the equation,” Yang said. “You have to be able to do it continuously in order to have large-scale production. Those are important factors.”
Though the team has demonstrated continuous production on a smaller scale in Yang’s lab, he said it will soon ramp up to further illustrate how the approach might be integrated into existing industrial processes.
Learn more: Huskers bring the heat to improve biodegradable plastics
The Latest on: Bioplastics
- Bioplastics Packaging Market by Manufacturers, Revenue, Trend and Forecast Report 2021-2026on January 23, 2021 at 12:18 am
In addition to modern developments and future forecasts, the study of Bioplastics Packaging offers an exhaustive investigation of this market to shed light on the impending investment pockets. The ...
- Market leader in bioplastics chooses Port of Rotterdamon January 21, 2021 at 3:24 am
Braskem, the world’s largest producer of biopolymers, has moved its storage facility for this type of bioplastics from Antwerp to Rotterdam. This strengthens Rotterdam Polymer Hub’s central ...
- Yield10 Bioscience Announces Achievement of Proof-of-Concept Milestone for Producing PHA ...on January 19, 2021 at 10:03 pm
(GLOBE NEWSWIRE) -- Yield10 Bioscience, Inc. (Nasdaq:YTEN), an agricultural bioscience company, today announced successful field testing of prototype lines of the oilseed Camelina sativa that have ...
- NatureWorks (Italy) and Braskem (Brazil) are Leading Players in the Bioplastics & Biopolymers Marketon January 19, 2021 at 2:19 pm
“Browse 65 market data Tables and 50 Figures spread through 152 Pages and in-depth TOC on “Bioplastics & Biopolymers Market”” Bioplastics & Biopolymers Market by Type (Non-Biodegradable ...
- Yield10 Bioscience Announces Achievement of Proof-of-Concept Milestone for Producing PHA Bioplastic in Field Grown Camelina Plantson January 19, 2021 at 5:30 am
Yield10 Bioscience, Inc., an agricultural bioscience company, today announced successful field testing of prototype lines of the oilseed Camelina sativa that have been programed to produce PHA ...
- Bioplastics start-up Xampla sows seeds for growthon January 18, 2021 at 2:31 am
UK-based start-up Xampla has closed a £6.2 million ($8.4m) seed financing round as it looks to accelerate the rollout of its ‘next generation’ bioplastics. Led by the backers behind video conferencing ...
- Bioplastics Market Size, Trends, Companies, Driver, Segmentation, Forecast to 2025on January 18, 2021 at 12:36 am
Selbyville, Delaware According to this study, over the next five years the Bioplastics market will register a 6.1%% CAGR in terms of revenue, the global market size will reach $ 4141.1 million by 2025 ...
- Global Bioplastics Market Report 2020 by Key Players, Types, Applications, Countries, Market Size, Forecast to 2026on January 15, 2021 at 8:57 pm
(MENAFN - Nxtgen Reports) The Bioplastics market is expected to grow from USD X.X million in 2020 to USD X.X million by 2026, at a CAGR of X.X% during the forecast period. The global Bioplastics ...
- Bioplastics Market Share Growth, Size, Statistics, Opportunities & Forecasts up to 2025on January 15, 2021 at 7:01 am
Selbyville, Delaware In the latest report on ‘ Bioplastics Market’, added by Market Study Report, LLC, a concise analysis on the recent industry trends is covered. The report further includes ...
- Bioplastics & Biopolymers Market Size | COVID-19 Impact Analysis | Forecast to 2026on January 14, 2021 at 3:09 am
Bioplastics & Biopolymers Market size is expected to grow from USD 10.5 billion in 2020 and USD 27.9 billion by 2025, at a CAGR of 21% during the forecast period. Biopolymers are simply polymers ...
via Google News and Bing News