In an advance that could boost the efficiency of LED lighting by 50 percent and even pave the way for invisibility cloaking devices, a team of University of Michigan researchers has developed a new technique that peppers metallic nanoparticles into semiconductors.
It’s the first technique that can inexpensively grow metal nanoparticles both on and below the surface of semiconductors. The process adds virtually no cost during manufacturing and its improved efficiency could allow manufacturers to use fewer semiconductors in finished products, making them less expensive.
The metal nanoparticles can increase the efficiency of LEDs in several ways. They can act as tiny antennas that alter and redirect the electricity running through the semiconductor, turning more of it into light. They can also help reflect light out of the device, preventing it from being trapped inside and wasted.
The main growth chamber of the molecular epitaxy beam apparatus used to make the nanoparticle-infused gallium nitride semiconductors. The semiconductors could boost LED efficiency by up to 50 percent, and even lead to invisibility cloaking devices.
Image credit: Joseph Xu, Michigan Engineering
The process can be used with the gallium nitride that’s used in LED lighting and can also boost efficiency in other semiconductor products, including solar cells. It’s detailed in a study published in the Journal of Applied Physics.
“This is a seamless addition to the manufacturing process, and that’s what makes it so exciting,” said Rachel Goldman, U-M professor of materials science and engineering, and physics. “The ability to make 3-D structures with these nanoparticles throughout is going to open a lot of possibilities.”
The key innovation
The idea of adding nanoparticles to increase LED efficiency is not new. But previous efforts to incorporate them have been impractical for large-scale manufacturing. They focused on pricey metals like silver, gold and platinum. In addition, the size and spacing of the particles must be very precise; this required additional and expensive manufacturing steps. Furthermore, there was no cost-effective way to incorporate particles below the surface.
Former materials science PhD student Sunyeol Jun prepares the molecular beam epitaxy apparatus that’s used to make the nanoparticle-infused gallium nitride semiconductors. The semiconductors could boost LED efficiency by up to 50 percent, and even lead to invisibility cloaking devices.
Image credit: Joseph Xu, Michigan Engineering
Goldman’s team discovered a simpler way that integrates easily with the molecular beam epitaxy process used to make semiconductors. Molecular beam epitaxy sprays multiple layers of metallic elements onto a wafer. This creates exactly the right conductive properties for a given purpose.
The U-M researchers applied an ion beam between these layers—a step that pushes metal out of the semiconductor wafer and onto the surface. The metal forms nanoscale particles that serve the same purpose as the pricey gold and platinum flecks in earlier research. Their size and placement can be precisely controlled by varying the angle and intensity of the ion beam. And applying the ion beam over and over between each layer creates a semiconductor with the nanoparticles interspersed throughout.
“If you carefully tailor the size and spacing of nanoparticles and how deeply they’re embedded, you can find a sweet spot that enhances light emissions,” said Myungkoo Kang, a former graduate student in Goldman’s lab and first author on the study. “This process gives us a much simpler and less expensive way to do that.”
A microscopy photo showing an array of precisely placed metallic nanoparticles on the surface of a gallium arsenide semiconductor.
Image courtesy: Rachel S. Goldman, Michigan Engineering
Researchers have known for years that metallic particles can collect on the surface of semiconductors during manufacturing. But they were always considered a nuisance, something that happened when the mix of elements was incorrect or the timing was off.
“From the very early days of semiconductor manufacturing, the goal was always to spray a smooth layer of elements onto the surface. If the elements formed particles instead, it was considered a mistake,” Goldman said. “But we realized that those ‘mistakes’ are very similar to the particles that manufacturers have been trying so hard to incorporate into LEDs. So we figured out a way to make lemonade out of lemons.”
Toward invisibility cloaks
Because the technique allows precise control over the nanoparticle distribution, the researchers say it may one day be useful for cloaks that render objects partially invisible by inducing a phenomenon known as “reverse refraction.”
Reverse refraction bends light waves backwards in a way that doesn’t occur in nature, potentially directing them around an object or away from the eye. The researchers believe that by carefully sizing and spacing an array of nanoparticles, they may be able to induce and control reverse refraction in specific wavelengths of light.
“For invisibility cloaking, we need to both transmit and manipulate light in very precise ways, and that’s very difficult today,” Goldman said. “We believe that this process could give us the level of control we need to make it work.”
The team is now working to adapt the ion beam process to the specific materials used in LEDs—they estimate that the higher-efficiency lighting devices could be ready for market within the next five years, with invisibility cloaking and other applications coming further in the future.
The Latest on: Invisibility cloaking devices
- Fortnite Infinite Invisibility Glitch Already Foundon January 21, 2021 at 8:18 am
Unsurprisingly, YouTuber Glitch King, somebody who specializes in his ability to break games and discover things like this, came across it. Instead of just showing you that it exists, this YouTuber ...
- Fortnite players have already found a Predator invisibility glitchon January 20, 2021 at 11:02 pm
Well, that didn’t take long. The Predator skin finally arrived in Fortnite today, giving players access to a new bounty hunter with an awesome Mythic-tier cloaking device. The only problem?
- How to Go Invisible Using The Fortnite Predator Deviceon January 20, 2021 at 12:22 pm
Do you want to go invisible in Fortnite using the new Predator Cloak Device? Check out how to get it and activate it.
- How strong is the new Cloaking Device in Fortnite?on January 20, 2021 at 12:02 pm
Part of what makes the Cloaking Device potentially strong in Fortnite is the fact that it totally alters how opponents have to approach combat. There aren’t too many ways to hid ...
- How to get Predator's cloaking device in Fortnite Season 5on January 20, 2021 at 10:30 am
The process of obtaining this cloaking device in Fortnite is very simple. Players need to defeat the Predator NPC at Stealthy Stronghold to gain control of this device. However, t ...
- Predator live now in Fortnite – how to get Predator skin and cloaking deviceon January 20, 2021 at 9:24 am
It’s been a long time coming but the Predator skin is finally available in Fortnite... if you can beat the creature first.
- Where to find Predator in Fortnite Season 5on January 20, 2021 at 9:03 am
Predator has finally landed in Fortnite When defeated, he will drop some valuable loot, including an invisibility device.
- Kill Predator in Fortnite and you will get its invisibility technology • Eurogamer.neton January 20, 2021 at 4:39 am
Kill Predator in Fortnite and you will get its invisibility technology • Eurogamer.net Fortnite's previously teased Predator crossover is ...
- Fortnite: How to Defeat Predatoron January 20, 2021 at 4:30 am
This guide will talk you through how to defeat Predator in Fortnite for the Jungle Hunter quest to unlock the Predator skin for yourself.
- Kill Predator in Fortnite and you get his invisibility techon January 20, 2021 at 3:37 am
Fortnite's previously-teased Predator crossover is now fully operational, with the masked hunter available to unlock for current battle pass holders via new challenges. Predator has also become a ...
via Google News and Bing News