New design substitutes an array of light receivers for a lens, making cameras thin, light, cheap, and flexible
Traditional cameras—even those on the thinnest of cell phones—cannot be truly flat due to their optics: lenses that require a certain shape and size in order to function. At Caltech, engineers have developed a new camera design that replaces the lenses with an ultra-thin optical phased array (OPA). The OPA does computationally what lenses do using large pieces of glass: it manipulates incoming light to capture an image.
Lenses have a curve that bends the path of incoming light and focuses it onto a piece of film or, in the case of digital cameras, an image sensor. The OPA has a large array of light receivers, each of which can individually add a tightly controlled time delay (or phase shift) to the light it receives, enabling the camera to selectively look in different directions and focus on different things.
“Here, like most other things in life, timing is everything. With our new system, you can selectively look in a desired direction and at a very small part of the picture in front of you at any given time, by controlling the timing with femto-second—quadrillionth of a second—precision,” says Ali Hajimiri, Bren Professor of Electrical Engineering and Medical Engineering in the Division of Engineering and Applied Science at Caltech, and the principal investigator of a paper describing the new camera. The paper was presented at the Optical Society of America’s (OSA) Conference on Lasers and Electro-Optics (CLEO) and published online by the OSA in the OSA Technical Digest in March 2017.
“We’ve created a single thin layer of integrated silicon photonics that emulates the lens and sensor of a digital camera, reducing the thickness and cost of digital cameras. It can mimic a regular lens, but can switch from a fish-eye to a telephoto lens instantaneously—with just a simple adjustment in the way the array receives light,” Hajimiri says.
Phased arrays, which are used in wireless communication and radar, are collections of individual transmitters, all sending out the same signal as waves. These waves interfere with each other constructively and destructively, amplifying the signal in one direction while canceling it out elsewhere. Thus, an array can create a tightly focused beam of signal, which can be steered in different directions by staggering the timing of transmissions made at various points across the array.
A similar principle is used in reverse in an optical phased array receiver, which is the basis for the new camera. Light waves that are received by each element across the array cancel each other from all directions, except for one. In that direction, the waves amplify each other to create a focused “gaze” that can be electronically controlled.
“What the camera does is similar to looking through a thin straw and scanning it across the field of view. We can form an image at an incredibly fast speed by manipulating the light instead of moving a mechanical object,” says graduate student Reza Fatemi (MS ’16), lead author of the OSA paper.
Last year, Hajimiri’s team rolled out a one-dimensional version of the camera that was capable of detecting images in a line, such that it acted like a lensless barcode reader but with no mechanically moving parts. This year’s advance was to build the first two-dimensional array capable of creating a full image. This first 2D lensless camera has an array composed of just 64 light receivers in an 8 by 8 grid. The resulting image has low resolution. But this system represents a proof of concept for a fundamental rethinking of camera technology, Hajimiri and his colleagues say.
“The applications are endless,” says graduate student Behrooz Abiri (MS ’12), coauthor of the OSA paper. “Even in today’s smartphones, the camera is the component that limits how thin your phone can get. Once scaled up, this technology can make lenses and thick cameras obsolete. It may even have implications for astronomy by enabling ultra-light, ultra-thin enormous flat telescopes on the ground or in space.”
“The ability to control all the optical properties of a camera electronically using a paper-thin layer of low-cost silicon photonics without any mechanical movement, lenses, or mirrors, opens a new world of imagers that could look like wallpaper, blinds, or even wearable fabric,” says Hajimiri. Next, the team will work on scaling up the camera by designing chips that enable much larger receivers with higher resolution and sensitivity.
Learn more: Ultra-Thin Camera Creates Images Without Lenses
The Latest on: Optical phased array
- New chip-based beam steering device lays groundwork for smaller, cheaper lidaron August 4, 2022 at 10:16 am
Researchers have developed a new chip-based beam steering technology that provides a promising route to small, cost-effective and high-performance lidar systems. Lidar, which uses laser pulses to ...
- New chip-based beam steering device lays groundwork for smaller, cheaper lidaron August 4, 2022 at 7:15 am
Paper: Y. Liu, H. Hu, “Silicon optical phased array with 180-degree field of view for 2D optical beam steering,” Optica, 9,8 (2022).
- New chip-based beam steering device lays groundwork for smaller, cheaper lidaron August 4, 2022 at 7:00 am
"Although devices known as chip-based optical phased arrays (OPAs ... Most OPAs use an array of waveguides to emit many beams of light and then interference is applied in far field (away from ...
- Smaller, Cheaper Lidar With New Chip-Based Beam Steering Deviceon August 4, 2022 at 7:00 am
Researchers have developed a new chip-based beam steering technology that provides a promising route to small, cost-effective, and high-performance lidar systems. Lidar, or light detection and ranging ...
- SKA to help unlock the secrets of the universeon August 1, 2022 at 5:02 am
Radio astronomy is on the verge of developing groundbreaking technology that will allow scientists to see into the furthest reaches of the universe.
- Demonstration of a highly efficient modulator using an organic electro-optic polymer for visible lighton July 11, 2022 at 10:02 am
The optical phased array for visible light can be available for stereoscopic displays. Compact and highly efficient display devices can be expected to be mounted in next-generation wearable ...
- Demonstration of a highly efficient modulator using the organic electro-optic polymer for visible lighton July 11, 2022 at 6:15 am
The National Institute of Information and Communications Technology (NICT, President: TOKUDA Hideyuki, Ph.D.) has successfully developed a highly efficient optical modulator using the organic ...
- Power/Performance Bits: July 3on July 2, 2022 at 5:00 pm
Engineers at Caltech developed a new camera design that replaces the lenses with an ultra-thin optical phased array (OPA). The OPA does computationally what lenses do using large pieces of glass: it ...
- 1.2 3D Imaging Deviceson March 1, 2022 at 12:35 pm
In earlier research, we proposed an optical phased array using electro-optic (EO) polymers in the optical wave guide (channel), which enabled the refractive index to be changed at very high speed ...
- Microwave photonics combines two worldson May 5, 2021 at 7:24 pm
The study of optically controlled microwave devices began over two decades ago with a view to their potential application in optical phased-array radars (a good overview can be found in ref.
via Google News and Bing News