
Yuanxun Wang/UCLA
SSDL circulator
The key to the UCLA design is an approach called “sequentially switched delay lines,” which is similar to the way transportation engineers route passenger trains from one track to another.
Device being developed by UCLA engineers could ease the traffic of cellphone signals
Mobile phones and computers use electromagnetic waves to send and receive information — they’re what enable our devices to upload photos and download apps. But there is only a limited amount of bandwidth available on the electromagnetic spectrum.
Engineers have envisioned that enabling wireless devices to send and receive information on the same frequency would be one way to overcome that limitation. But that approach posed its own challenge, because incoming and outgoing waves on the same frequency typically interfere with each other. (That’s why, for example, radio stations that use the same frequency disrupt each other’s signals when a radio is close enough to both of them.)
A new design developed by UCLA electrical engineers could solve that problem. The researchers proved that a circulator — a tiny device that sends and receives electromagnetic waves from different ports — that shared the same antenna could enable signals to be sent and received simultaneously. Sending signals on the same frequencies that they are received could essentially double the space on the spectrum available for chips to transfer data.
A paper about the work was published in Scientific Reports, an open-access journal published by Nature.
Previous generations of circulators used magnetic material, which cannot be incorporated into current microchips and doesn’t have enough bandwidth for today’s smartphones and other devices. The UCLA prototype uses coaxial cables to route the electromagnetic waves through non-magnetic material, but the device would ultimately be likely to be built with silicon-based or other semiconductor materials.
The key to the design is an approach called “sequentially switched delay lines,” which is similar to the way transportation engineers route passenger trains from one track to another, to allow multiple trains to enter and exit train stations at the same time and avoid collisions, even if there are only a few available tracks.
“In a busy train station, trains are actively switched onto and off of tracks to minimize the time they might be stopped to get into and out of the station,” said Yuanxun “Ethan” Wang, an associate professor of electrical engineering at the UCLA Henry Samueli School of Engineering and Applied Science who led the research. “This is the same idea, only with electromagnetic waves of the same frequency carrying information inside a chip.”
Lead author Mathew Biedka and co-author Rui Zhu are UCLA doctoral students advised by Wang, and co-author Qiang “Mark” Xu is a postdoctoral scholar in Wang’s laboratory.
The team demonstrated its concept using commercially available parts, and is now testing it on specially fabricated chips.
The design includes six transmission lines, all of equal lengths, connected by five switches. The switches are turned on and off sequentially to distribute electromagnetic waves and allow simultaneous transmission and reception of data-carrying signals.
Previous studies have demonstrated that signals could be sent and received simultaneously using the same electromagnetic frequency, including one led by led by Wang in 2014, which modulated the signals. But, according to the researchers, the new design is the first one that offers unlimited bandwidth.
It could easily be incorporated into current chip manufacturing processes and within almost all industry-standard designs. Previous concepts would have required the use of components that don’t align with current industry standards, or have only worked in a narrow band of the spectrum. Wang said the new UCLA circulator works from the lowest of frequencies up to radio frequencies, and might even work in the visible light part of the spectrum.
“Just like a capacitor or a resistor, a device capable of routing electromagnetic waves is a fundamental building block in almost any circuit,” Wang said. “Making it available with unlimited bandwidth would trigger a revolution in design of mobile phones, automobile sensors or even quantum computers.”
Learn more: Design for new electromagnetic wave router offers unlimited bandwidth
Receive an email update when we add a new ELECTROMAGNETIC WAVE ROUTER article.
The Latest on: Electromagnetic wave router
via Google News
The Latest on: Electromagnetic wave router
- How Does Wi-Fi Work? An Electrical Engineer Explainson January 15, 2021 at 7:00 am
The wave, in turn, causes an alternating current in the second wire. The electromagnetic spectrum ... antenna on the back of your home internet router or a Wi-Fi antenna in a café.
- How does Wi-Fi work? An electrical engineer explainson January 12, 2021 at 7:08 am
Though you cant see them radio waves are all around you all the time carrying information For most people some of those radio waves are Wi-Fi s ...
- A Wireless, Battery-Free World: How Do We Power It?on January 2, 2021 at 8:32 pm
With the right equipment, the electromagnetic waves sent by the Wi-Fi router could be enough to supply the energy needed to power the motion sensor. Converting waves to power Devices whose ...
- 5 Tips to Safeguard Against Electromagnetic Radiationon December 28, 2020 at 4:10 pm
routers, X-ray machines, and radios all emit them to varying degrees. “Electromagnetic radiation is a form of energy that is all around us and takes many forms, such as radio waves, microwaves, X-rays ...
- Conspiracy theorists are putting their routers in Faraday cages – and complaining about bad Wi-Fion December 24, 2020 at 4:00 pm
‘Despite all my rage, I am still just a router ... uses electromagnetic radiation to communicate. The word “radiation” may sound scary, but ordinary things like light and radio waves are ...
- Christmas lights could be ruining your WiFi this festive season – how to boost your speedson December 24, 2020 at 5:39 am
refrigerator or Christmas lights all send out their own electromagnetic waves that get in the way of your WiFi signal. Put two and two together, and you'll realise why keeping your router away ...
- Can Christmas tree lights really play havoc with your Wi-Fi?on December 6, 2020 at 7:08 am
The [To enable links contact MENAFN] electromagnetic spectrum ... powerful than a big FM transmitter and its waves are weaker, where you place the router and what you have in your house will ...
- People are putting their routers in jail to protect themselves from harmless Wi-Fion December 3, 2020 at 3:04 pm
A Faraday cage, after all, blocks electromagnetic radiation and signals from escaping. Putting one around your router would, by very similar physics, prevent those same radio waves that carry your ...
- Wired LANs: The Oft-Forgotton Connectivity Optionon November 23, 2020 at 4:00 pm
They include speed, less electromagnetic interference (EMI), better security ... As a result, the number of servers and routers that serve ever more LAN ports will continue to grow—as will the ...
via Bing News