New technology allows multispectral reactions on a single chip
Duke University researchers believe they have overcome a longstanding hurdle to producing cheaper, more robust ways to print and image across a range of colors extending into the infrared.
As any mantis shrimp will tell you, there are a wide range of “colors” along the electromagnetic spectrum that humans cannot see but which provide a wealth of information. Sensors that extend into the infrared can, for example, identify thousands of plants and minerals, diagnose cancerous melanomas and predict weather patterns, simply by the spectrum of light they reflect.
Current imaging technologies that can detect infrared wavelengths are expensive and bulky, requiring numerous filters or complex assemblies in front of an infrared photodetector. The need for mechanical movement in such devices reduces their expected lifetime and can be a liability in harsh conditions, such as those experienced by satellites.
In a new paper, a team of Duke engineers reveals a manufacturing technique that promises to bring a simplified form of multispectral imaging into daily use. Because the process uses existing materials and fabrication techniques that are inexpensive and easily scalable, it could revolutionize any industry where multispectral imaging or printing is used.
The results appear online December 14 in the journal Advanced Materials.
“It’s challenging to create sensors that can detect both the visible spectrum and the infrared,” said Maiken Mikkelsen, the Nortel Networks Assistant Professor of Electrical and Computer Engineering and Physics at Duke.
“Traditionally you need different materials that absorb different wavelengths, and that gets very expensive,” Mikkelsen said. “But with our technology, the detectors’ responses are based on structural properties that we design rather than a material’s natural properties. What’s really exciting is that we can pair this with a photodetector scheme to combine imaging in both the visible spectrum and the infrared on a single chip.”
The new technology relies on plasmonics — the use of nanoscale physical phenomena to trap certain frequencies of light.
Engineers fashion silver cubes just 100 nanometers wide and place them only a few nanometers above a thin gold foil. When incoming light strikes the surface of a nanocube, it excites the silver’s electrons, trapping the light’s energy — but only at a certain frequency.
The size of the silver nanocubes and their distance from the base layer of gold determines that frequency, while controlling the spacing between the nanoparticles allows tuning the strength of the absorption. By precisely tailoring these spacings, researchers can make the system respond to any specific color they want, all the way from visible wavelengths out to the infrared.
The challenge facing the engineers is how to build a useful device that could be scalable and inexpensive enough to use in the real world. For that, Mikkelsen turned to her research team, including graduate student Jon Stewart.
“Similar types of materials have been demonstrated before, but they’ve all used expensive techniques that have kept the technology from transitioning to the market,” said Stewart. “We’ve come up with a fabrication scheme that is scalable, doesn’t need a clean room and avoids using million-dollar machines, all while achieving higher frequency sensitivities. It has allowed us to do things in the field that haven’t been done before.”
To build a detector, Mikkelsen and Stewart used a process of light etching and adhesives to pattern the nanocubes into pixels containing different sizes of silver nanocubes, and thus each sensitive to a specific wavelength of light. When incoming light strikes the array, each area responds differently depending on the wavelength of light it is sensitive to. By teasing out how each part of the array responds, a computer can reconstruct what color the original light was.
The technique can be used for printing as well, the team showed. Instead of creating pixels with six sections tuned to respond to specific colors, they created pixels with three bars that reflect three colors: blue, green and red. By controlling the relative lengths of each bar, they can dictate what combination of colors the pixel reflects. It’s a novel take on the classic RGB scheme first used in photography in 1861.
But unlike most other applications, the plasmonic color scheme promises to never fade over time and can be reliably reproduced with tight accuracy time and again. It also allows its adopters to create color schemes in the infrared.
“Again, the exciting part is being able to print in both visible and infrared on the same substrate,” said Mikkelsen. “You could imagine printing an image with a hidden portion in the infrared, or even covering an entire object to tailor its spectral response.”
[osd_subscribe categories=’multispectral-imaging’ placeholder=’Email Address’ button_text=’Subscribe Now for any new posts on the topic “MULTISPECTRAL IMAGING”‘]
Receive an email update when we add a new MULTISPECTRAL IMAGING article.
The Latest on: Plasmonic color scheme
via Google News
The Latest on: Plasmonic color scheme
- NASCAR introduces patriotic paint schemes for Coca-Cola 600on May 27, 2022 at 2:57 pm
Many of the cars also go all out with their red, white and blue paint schemes. Kyle Larson's Hendrick Motorsports Chevrolet will have the name of U.S. Army Specialist Rel Allen Ravago IV of Glendale, ...
- First look: No. 48 patriotic paint scheme for Coca-Cola 600on May 18, 2022 at 12:32 pm
Hendrick Motorsports and Ally revealed on Wednesday the patriotic paint scheme Alex Bowman will sport at this year's Coca-Cola 600.
- Paint scheme preview: NASCAR All-Star Race at Texason May 18, 2022 at 9:28 am
Hendrick Motorsports drivers will be in pursuit of a $1,000,000 prize this weekend when the NASCAR Cup Series arrives at Texas Motor Speedway for the NASCAR All-Star Race. What paint schemes will the ...
- Xuejun Luon September 17, 2018 at 9:36 am
Prof. Xuejun LuÍs research interests include longwave infrared (LWIR) focal plane array (FPA), Multi-color (band) IR sensors; LWIR image amplifier; Flexible thin-film transistors; Printable ...
- Selected Peer-Reviewed Refereed Publicationson December 24, 2015 at 11:55 am
Swapnil Chaugrule and Dalila B. Megherbi, “A DWT-Based Blind Robust High Capacity and Secure Digital Watermarking and Information Hiding Scheme for Image Authentication, Tampering Localization and ...
via Bing News