New stamping technique creates functional features at nanoscale dimensions.
The next time you place your coffee order, imagine slapping onto your to-go cup a sticker that acts as an electronic decal, letting you know the precise temperature of your triple-venti no-foam latte. Someday, the high-tech stamping that produces such a sticker might also bring us food packaging that displays a digital countdown to warn of spoiling produce, or even a window pane that shows the day’s forecast, based on measurements of the weather conditions outside.
Engineers at MIT have invented a fast, precise printing process that may make such electronic surfaces an inexpensive reality. In a paper published today in Science Advances, the researchers report that they have fabricated a stamp made from forests of carbon nanotubes that is able to print electronic inks onto rigid and flexible surfaces.
A. John Hart, the Mitsui Career Development Associate Professor in Contemporary Technology and Mechanical Engineering at MIT, says the team’s stamping process should be able to print transistors small enough to control individual pixels in high-resolution displays and touchscreens. The new printing technique may also offer a relatively cheap, fast way to manufacture electronic surfaces for as-yet-unknown applications.
“There is a huge need for printing of electronic devices that are extremely inexpensive but provide simple computations and interactive functions,” Hart says. “Our new printing process is an enabling technology for high-performance, fully printed electronics, including transistors, optically functional surfaces, and ubiquitous sensors.”
Sanha Kim, a postdoc in MIT’s department of Mechanical Engineering, is the lead author, and Hart is the senior author. Their co-authors are Hossein Sojoudi, a postdoc in mechanical engineering and chemical engineering; Hangbo Zhao and Dhanushkodi Mariappan, graduate students in mechanical engineering; Gareth McKinley, the School of Engineering Professor of Teaching Innovation; and Karen Gleason, professor of chemical engineering and MIT’s associate provost.
A stamp from tiny pen quills
There have been other attempts in recent years to print electronic surfaces using inkjet printing and rubber stamping techniques, but with fuzzy results. Because such techniques are difficult to control at very small scales, they tend to produce “coffee ring” patterns where ink spills over the borders, or uneven prints that can lead to incomplete circuits.
“There are critical limitations to existing printing processes in the control they have over the feature size and thickness of the layer that’s printed,” Hart says. “For something like a transistor or thin film with particular electrical or optical properties, those characteristics are very important.”
Hart and his team sought to print electronics much more precisely, by designing “nanoporous” stamps. (Imagine a stamp that’s more spongy than rubber and shrunk to the size of a pinky fingernail, with patterned features that are much smaller than the width of a human hair.) They reasoned that the stamp should be porous, to allow a solution of nanoparticles, or “ink,” to flow uniformly through the stamp and onto whatever surface is to be printed. Designed in this way, the stamp should achieve much higher resolution than conventional rubber stamp printing, referred to as flexography.
Kim and Hart hit upon the perfect material to create their highly detailed stamp: carbon nanotubes — strong, microscopic sheets of carbon atoms, arranged in cylinders. Hart’s group has specialized in growing forests of vertically aligned nanotubes in carefully controlled patterns that can be engineered into highly detailed stamps.
“It’s somewhat serendipitous that the solution to high-resolution printing of electronics leverages our background in making carbon nanotubes for many years,” Hart says. “The forests of carbon nanotubes can transfer ink onto a surface like massive numbers of tiny pen quills.”
Printing circuits, roll by roll
To make their stamps, the researchers used the group’s previously developed techniques to grow the carbon nanotubes on a surface of silicon in various patterns, including honeycomb-like hexagons and flower-shaped designs. They coated the nanotubes with a thin polymer layer (developed by Gleason’s group) to ensure the ink would penetrate throughout the nanotube forest and the nanotubes would not shrink after the ink was stamped. Then they infused the stamp with a small volume of electronic ink containing nanoparticles such as silver, zinc oxide, or semiconductor quantum dots.
The key to printing tiny, precise, high-resolution patterns is in the amount of pressure applied to stamp the ink. The team developed a model to predict the amount of force necessary to stamp an even layer of ink onto a substrate, given the roughness of both the stamp and the substrate, and the concentration of nanoparticles in the ink.
To scale up the process, Mariappan built a printing machine, including a motorized roller, and attached to it various flexible substrates. The researchers fixed each stamp onto a platform attached to a spring, which they used to control the force used to press the stamp against the substrate.
“This would be a continuous industrial process, where you would have a stamp, and a roller on which you’d have a substrate you want to print on, like a spool of plastic film or specialized paper for electronics,” Hart says. “We found, limited by the motor we used in the printing system, we could print at 200 millimeters per second, continuously, which is already competitive with the rates of industrial printing technologies. This, combined with a tenfold improvement in the printing resolution that we demonstrated, is encouraging.”
After stamping ink patterns of various designs, the team tested the printed patterns’ electrical conductivity. After annealing, or heating, the designs after stamping — a common step in activating electronic features — the printed patterns were indeed highly conductive, and could serve, for example, as high-performance transparent electrodes.
Going forward, Hart and his team plan to pursue the possibility of fully printed electronics.
“Another exciting next step is the integration of our printing technologies with 2-D materials, such as graphene, which together could enable new, ultrathin electronic and energy conversion devices,” Hart says.
Learn more: Printable electronics
[osd_subscribe categories=’printed-electronics-2′ placeholder=’Email Address’ button_text=’Subscribe Now for any new posts on the topic “PRINTED ELECTRONICS”‘]
Receive an email update when we add a new PRINTED ELECTRONICS article.
The Latest on: Nanoscale printed electronics
via Google News
The Latest on: Nanoscale printed electronics
- Physicists generate new nanoscale spin waveson September 15, 2022 at 10:25 am
Strong alternating magnetic fields can be used to generate a new type of spin wave that was previously just theoretically predicted. This was achieved for the first time by a team of physicists from ...
- Breaking an optical rule: Engineers find a way to manipulate light at the nanoscaleon September 12, 2022 at 9:48 am
If you're going to break a rule with style, make sure everybody sees it. That's the goal of engineers at Rice University who hope to improve screens for virtual reality, 3D displays and optical ...
- Ideal Method to Fabricate 1D Nanomaterials For Bioengineeringon September 9, 2022 at 6:09 pm
The nanobrushes used in the present work were films and yarns with parallel nanoscale building blocks ... the assembly of various nanomaterials to meet the challenges in printed electronics, nano ...
- Glucose Monitor Uses 3D Printingon September 1, 2022 at 5:00 pm
(Image source: WSU) Wearable Patient Monitors Wearable, flexible electronics ... a nanoscale material that is electrically conductive—out of nozzles to create intricate and precise designs at tiny ...
- Navigating the Nanotechnology Patent Thicketon August 31, 2022 at 5:00 pm
Aside from the technical challenges, some of the more well-known obstacles are the regulatory hurdles and safety concerns about nanoscale materials ... is that large companies in the semiconductor and ...
- 3D Printing at the Microscale Will Cut Cost and Sizeon August 16, 2022 at 5:00 pm
There's been a lot of R&D activity recently in 3D printing at the nanoscale ... as industrial parts or medical devices. In electronics, one example is the freestanding, millimeter-wave dipole antenna ...
- Nanoscale Advanceson March 3, 2022 at 7:37 am
Nanoscale Advances is an international gold open access journal, publishing high-quality research across the breadth of nanoscience and nanotechnology. We are the first Royal Society of Chemistry ...
- Nanoscale Advances editorial board memberson March 2, 2022 at 10:10 pm
Cinzia's current research work is focused on the development of biocompatible 2D inks and their use in printed electronics and biomedical applications ... including Nature Communications, Nanoscale ...
- About the Editoron November 17, 2021 at 5:21 pm
Fiori has recently embarked on an experimental activity on printed electronics ... sensitive label-free biosensor and technology for nanoscale deciphering of biological building blocks of brain.
via Bing News