Soft actuator could be ‘holy grail’ for soft robotics
Soft robots do a lot of things well but they’re not exactly known for their speed. The artificial muscles that move soft robots, called actuators, tend to rely on hydraulics or pneumatics, which are slow to respond and difficult to store.
Dielectric elastomers, soft materials that have good insulating properties, could offer an alternative to pneumatic actuators but they currently require complex and inefficient circuitry to deliver high voltage as well as rigid components to maintain their form— both of which defeat the purpose of a soft robot.
Now, researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have developed a dielectric elastomer with a broad range of motion that requires relatively low voltage and no rigid components.
They published their work recently in Advanced Materials.
“We think this has the potential to be the holy grail of soft robotics,” said Mishu Duduta, a graduate student at SEAS and first author of the paper. “Electricity is easy to store and deliver but until now, the electric fields required to power actuators in soft robots has been too high. This research solves a lot of the challenges in soft actuation by reducing actuation voltage and increasing energy density, while eliminating rigid components.”
Duduta co-authored the paper with Robert Wood, the Charles River Professor of Engineering and Applied Sciences and David Clarke, the Extended Tarr Family Professor of Materials.
In building a new dielectric elastomer, the team combined two known materials that worked well individually — an elastomer based on one developed at UCLA that eliminated the need for rigid components and an electrode of carbon nanotubes developed in the Clarke Lab. The complementary properties of these two materials enabled the new device to outperform standard dielectric elastomer actuators.
Most dielectric elastomers have limited range of motion and need to be pre-stretched and attached to a rigid frame. Starting with an elastomer that doesn’t need to be pre-stretched, developed by researchers at UCLA, the modified materials begin as liquids and can be cured rapidly under UV light to produce paper-thin sheets. They are sticky — like double-sided tape — so they can adhere well to each other, and to the electrodes.
For the electrodes, the team replaced carbon grease, which is typically used as an electrode in dielectric elastomers, with a mat of thin carbon nanotubes. The nanotubes neither increase the stiffness of the elastomer nor decrease the energy density — meaning the elastomer can still stretch and provide significant force. The team fabricated the elastomers one on top of the other, creating a multilayer sandwich of elastomer, electrode, elastomer, electrode and so on. In this way, each electrode gets double usage, powering the elastomer above and below.
“The voltage required to actuate dielectric elastomers is directly related to the thickness of the material, so you have to make your dielectric elastomer as thin as possible,” said Duduta. “But really thin elastomers are flimsy and can’t produce force. A multilayer elastomer is much more robust and can actually provide significant force.”
“The significance of this work is that the combination of materials and processing enables two of the current technical limitations of dielectric elastomers — the need for high voltage and pre-stretch — to be overcome,” said Clarke.
This type of actuator could be used in everything from wearable devices to soft grippers, laparoscopic surgical tools, entirely soft robots or artificial muscles in more complex robotics.
“Actuation is one of the most difficult challenges in robotics,” said Wood. “The vast majority of existing robots rely on conventional electromagnetic rotary motors. In cases where we cannot use such motors, for example in soft robots, there are few alternatives for high performance actuation. This breakthrough in electrically-controlled soft actuators brings us much closer to muscle-like performance in an engineered system and opens the door for countless applications in soft robotics.”
The Latest on: Soft robotics
[google_news title=”” keyword=”Soft robotics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Soft robotics
- The Next Frontier in Carbon Capture Is a Hungry Bacteriumon December 9, 2022 at 9:02 am
Emissions from industrial plants worldwide have been driving global warming for decades. Waste and gases from facilities like steel mills are rich in carbon and constitute about 21% of humanity’s ...
- Cumbria coal mine: Empty promises of carbon capture tech have excused digging up more fossil fuel for decadeson December 9, 2022 at 8:50 am
The idea that a technology called carbon capture and storage (CCS) could catch molecules of CO₂ as they emerge from the chimneys of power stations and factories has been around for more than two ...
- Ground breaks on $67M carbon-capture plant in Springfieldon December 9, 2022 at 6:57 am
The University of Illinois’ Prairie Research Institute is involved in the $67 million project. One lawmaker said this is almost as big for the U of I as the Illini basketball team’s win over Texas ...
- Cleveland-Cliffs eyes carbon capture at Burns Harboron December 8, 2022 at 5:15 pm
Cleveland-Cliffs is eyeing a large-scale carbon capture at its Burns Harbor Works mill amid a push to decarbonize the steel industry.
- LSU to participate in $50M carbon capture and sequestration projecton December 8, 2022 at 11:41 am
LSU’s chemical and petroleum engineering departments are working with the Greater New Orleans Development Foundation on a federally funded $50 million carbon capture, utilization and sequestration ...
- Carbon Capture Deployed for Indianapolis Airport Runway Revampon December 8, 2022 at 9:52 am
A$190-million runway and taxiway reconstruction project at Indianapolis International Airport features the first-ever Federal Aviation Administration-approved use of a carbon capture technology in the ...
- Athabasca Oil says it will greenlight carbon capture project in the oilsands next yearon December 8, 2022 at 7:30 am
(CCS) project at its Leismer oilsands site. Athabasca hopes to increase production at this site by about 30 per cent by 2024, and a final investment decision is expected next year. The company is ...
- Carbon capture for New York high-rise apartments is a real thing nowon December 8, 2022 at 12:30 am
Carbon capture at power plants has eluded cost-effective commercialization for so long that when a company pitched me claiming that it had achieved this at a New York City apartment building, I was ...
- Stena Impero to return to global stage in carbon capture trialon December 7, 2022 at 10:33 pm
The Stena Impero gained international prominence after it was seized by Iran two weeks after British marines detained an Iranian VLCC, the 301,000-dwt Grace 1 (built 1997), in con ...
- Athabasca May Beat Pathways Alliance in Oil Sands Carbon Captureon December 7, 2022 at 4:10 pm
Canadian crude producer Athabasca Oil Co. may beat an alliance of the country’s largest energy companies in rolling out carbon capture and storage in the oil sands.
via Bing News