Grid-scale approach to rechargeable power storage gets new arsenal of possible materials
Liquid metal batteries, invented by MIT professor Donald Sadoway and his students a decade ago, are a promising candidate for making renewable energy more practical. The batteries, which can store large amounts of energy and thus even out the ups and downs of power production and power use, are in the process of being commercialized by a Cambridge-based startup company, Ambri.
Now, Sadoway and his team have found yet another set of chemical constituents that could make the technology even more practical and affordable, and open up a whole family of potential variations that could make use of local resources.
The latest findings are reported in the journal Nature Communications, in a paper by Sadoway, who is the John F. Elliott Professor of Materials Chemistry, and postdoc Takanari Ouchi, along with Hojong Kim (now a professor at Penn State University) and PhD student Brian Spatocco at MIT. They show that calcium, an abundant and inexpensive element, can form the basis for both the negative electrode layer and the molten salt that forms the middle layer of the three-layer battery.
That was a highly unexpected finding, Sadoway says. Calcium has some properties that made it seem like an especially unlikely candidate to work in this kind of battery. For one thing, calcium easily dissolves in salt, and yet a crucial feature of the liquid battery is that each of its three constituents forms a separate layer, based on the materials’ different densities, much as different liqueurs separate in some novelty cocktails. It’s essential that these layers not mix at their boundaries and maintain their distinct identities.
It was the seeming impossibility of making calcium work in a liquid battery that attracted Ouchi to the problem, he says. “It was the most difficult chemistry” to make work but had potential benefits due to calcium’s low cost as well as its inherent high voltage as a negative electrode. “For me, I’m happiest with whatever is most difficult,” he says — which, Sadoway points out, is a very typical attitude at MIT.
Another problem with calcium is its high melting point, which would have forced the liquid battery to operate at almost 900 degrees Celsius, “which is ridiculous,” Sadoway says. But both of these problems were solvable.
First, the researchers tackled the temperature problem by alloying the calcium with another inexpensive metal, magnesium, which has a much lower melting point. The resulting mix provides a lower operating temperature — about 300 degrees less than that of pure calcium — while still keeping the high-voltage advantage of the calcium.
The other key innovation was in the formulation of the salt used in the battery’s middle layer, called the electrolyte, that charge carriers, or ions, must cross as the battery is used. The migration of those ions is accompanied by an electric current flowing through wires that are connected to the upper and lower molten metal layers, the battery’s electrodes.
The new salt formulation consists of a mix of lithium chloride and calcium chloride, and it turns out that the calcium-magnesium alloy does not dissolve well in this kind of salt, solving the other challenge to the use of calcium.
But solving that problem also led to a big surprise: Normally there is a single “itinerant ion” that passes through the electrolyte in a rechargeable battery, for example, lithium in lithium-ion batteries or sodium in sodium-sulfur. But in this case, the researchers found that multiple ions in the molten-salt electrolyte contribute to the flow, boosting the battery’s overall energy output. That was a totally serendipitous finding that could open up new avenues in battery design, Sadoway says.
And there’s another potential big bonus in this new battery chemistry, Sadoway says. “There’s an irony here. If you’re trying to find high-purity ore bodies, magnesium and calcium are often found together,” he says. It takes great effort and energy to purify one or the other, removing the calcium “contaminant” from the magnesium or vice versa. But since the material that will be needed for the electrode in these batteries is a mixture of the two, it may be possible to save on the initial materials costs by using “lower” grades of the two metals that already contain some of the other.
“There’s a whole level of supply-chain optimization that people haven’t thought about,” he says.
Sadoway and Ouchi stress that these particular chemical combinations are just the tip of the iceberg, which could represent a starting point for new approaches to devising battery formulations. And since all these liquid batteries, including the original liquid battery materials from his lab and those under development at Ambri, would use similar containers, insulating systems, and electronic control systems, the actual internal chemistry of the batteries could continue to evolve over time. They could also adapt to fit local conditions and materials availability while still using mostly the same components.
“The lesson here is to explore different chemistries and be ready for changing market conditions,” Sadoway says. What they have developed “is not a battery; it’s a whole battery field. As time passes, people can explore more parts of the periodic table” to find ever-better formulations, he says.
“This paper brings together innovative engineering advances in cell design and component materials within a strategic framework of ‘cost-based discovery’ that is amenable to the massive scale-up required of grid-scale applications,” says Richard Alkire, a professor of Chemical and Biomolecular Engineering at the University of Illinois, who was not involved in this research.
Because this work builds on a base of well-developed electrochemical systems used for aluminum production, Alkire says, “the path forward to grid-scale applications can therefore take advantage of a large body of existing engineering experience in areas of sustainability, environmental, life cycle, materials, manufacturing cost, and scale-up.”
Learn more: New chemistries found for liquid batteries
The Latest on: Liquid batteries
via Google News
The Latest on: Liquid batteries
- Schneider Electric Touts Smaller UPS Batteries on the Road to Sustainabilityon June 18, 2021 at 1:08 pm
The path to data center carbon neutrality, says the power systems maker, leads through the elimination of lead-acid batteries from backup systems. Maybe, but just how much of a course change is ...
- Giga Metals may produce mixed hydroxide precipitate for Li-ion batterieson June 18, 2021 at 6:06 am
MHP is a chemical form of nickel and cobalt that is experiencing rapid demand increase for its role in the supply chain for lithium-ion batteries.
- Semiconductor technology mitigates fire risk in electric vehicle batterieson June 16, 2021 at 8:05 am
Despite rapid development of electric vehicles (EVs), lithium-ion (Li-ion) batteries are a fire and explosion risk. Among the approaches to tackle this issue, Korean researchers have used ...
- Solid Power, QuantumScape, and the Battle for Next-Generation Batterieson June 16, 2021 at 4:37 am
Solid Power is the second solid-state battery startup to come to the stock market. With a lower valuation than its predecessor, QuantumScape, it reflects investors’ thirst for disruption stories.
- EV Battery Research Powers Ahead Toward Next Big Breakthroughon June 14, 2021 at 10:00 am
Widespread adoption of electric cars leans on EV battery technology evolving to increase their driving range. An anticipated breakthrough is a solid-state battery – a lighter, more powerful and safer ...
- Weird backlight issues after liquid damageon June 13, 2021 at 4:30 pm
I’m working on a 2017 MacBook Air that had some liquid damage on the power board (the separate board that has magsafe, USB, and aux). At first it would not power on at all but I could see immediately ...
- Can "Liquid Batteries" Solve This Oil Crisis?on June 10, 2021 at 11:13 am
Yes, the world is in an oil crisis the likes of which we've never seen. But it's not the kind of crisis you're used to hearing about. It's not the sudden, life-changing, dramatic sort of event that ...
- Widespread electrification requires us to rethink battery technologyon June 10, 2021 at 8:52 am
The global transition to electrification has increased demand for longer-lasting and faster-charging batteries. But battery innovation hasn’t kept pace with society’s ambitions.
- Stabilizing gassy electrolytes could make ultra-low temperature batteries saferon June 7, 2021 at 1:53 pm
A new technology could dramatically improve the safety of lithium-ion batteries that operate with gas electrolytes at ultra-low temperatures. Nanoengineers at the University of California San Diego ...
- Next Generation Liquid Metal Battery Market – COVID19 Impact Analysis, Share, Trends and Forecast 2021on June 7, 2021 at 11:55 am
In 2020, the global Next Generation Liquid Metal Battery market produced a revenue of around USD 3,500 million and anticipated to grow at a CAGR of over 11.2% during the forecast period from 2021 to ...
via Bing News