Generating and storing renewable energy, such as solar or wind power, is a key barrier to a clean-energy economy.
When the Joint Center for Artificial Photosynthesis (JCAP) was established at Caltech and its partnering institutions in 2010, the U.S. Department of Energy (DOE) Energy Innovation Hub had one main goal: a cost-effective method of producing fuels using only sunlight, water, and carbon dioxide, mimicking the natural process of photosynthesis in plants and storing energy in the form of chemical fuels for use on demand. Over the past five years, researchers at JCAP have made major advances toward this goal, and they now report the development of the first complete, efficient, safe, integrated solar-driven system for splitting water to create hydrogen fuels.
“This result was a stretch project milestone for the entire five years of JCAP as a whole, and not only have we achieved this goal, we also achieved it on time and on budget,” says Caltech’s Nate Lewis, George L. Argyros Professor and professor of chemistry, and the JCAP scientific director.
The new solar fuel generation system, or artificial leaf, is described in the August 27 online issue of the journal Energy and Environmental Science. The work was done by researchers in the laboratories of Lewis and Harry Atwater, director of JCAP and Howard Hughes Professor of Applied Physics and Materials Science.
“This accomplishment drew on the knowledge, insights and capabilities of JCAP, which illustrates what can be achieved in a Hub-scale effort by an integrated team,” Atwater says. “The device reported here grew out of a multi-year, large-scale effort to define the design and materials components needed for an integrated solar fuels generator.”
The new system consists of three main components: two electrodes—one photoanode and one photocathode—and a membrane. The photoanode uses sunlight to oxidize water molecules, generating protons and electrons as well as oxygen gas. The photocathode recombines the protons and electrons to form hydrogen gas. A key part of the JCAP design is the plastic membrane, which keeps the oxygen and hydrogen gases separate. If the two gases are allowed to mix and are accidentally ignited, an explosion can occur; the membrane lets the hydrogen fuel be separately collected under pressure and safely pushed into a pipeline.
Semiconductors such as silicon or gallium arsenide absorb light efficiently and are therefore used in solar panels. However, these materials also oxidize (or rust) on the surface when exposed to water, so cannot be used to directly generate fuel. A major advance that allowed the integrated system to be developed was previous work in Lewis’s laboratory, which showed that adding a nanometers-thick layer of titanium dioxide (TiO2)—a material found in white paint and many toothpastes and sunscreens—onto the electrodes could prevent them from corroding while still allowing light and electrons to pass through. The new complete solar fuel generation system developed by Lewis and colleagues uses such a 62.5-nanometer-thick TiO2 layer to effectively prevent corrosion and improve the stability of a gallium arsenide–based photoelectrode.
Another key advance is the use of active, inexpensive catalysts for fuel production. The photoanode requires a catalyst to drive the essential water-splitting reaction. Rare and expensive metals such as platinum can serve as effective catalysts, but in its work the team discovered that it could create a much cheaper, active catalyst by adding a 2-nanometer-thick layer of nickel to the surface of the TiO2. This catalyst is among the most active known catalysts for splitting water molecules into oxygen, protons, and electrons and is a key to the high efficiency displayed by the device.
The photoanode was grown onto a photocathode, which also contains a highly active, inexpensive, nickel-molybdenum catalyst, to create a fully integrated single material that serves as a complete solar-driven water-splitting system.
A critical component that contributes to the efficiency and safety of the new system is the special plastic membrane that separates the gases and prevents the possibility of an explosion, while still allowing the ions to flow seamlessly to complete the electrical circuit in the cell. All of the components are stable under the same conditions and work together to produce a high-performance, fully integrated system. The demonstration system is approximately one square centimeter in area, converts 10 percent of the energy in sunlight into stored energy in the chemical fuel, and can operate for more than 40 hours continuously.
“This new system shatters all of the combined safety, performance, and stability records for artificial leaf technology by factors of 5 to 10 or more ,” Lewis says.
“Our work shows that it is indeed possible to produce fuels from sunlight safely and efficiently in an integrated system with inexpensive components,” Lewis adds, “Of course, we still have work to do to extend the lifetime of the system and to develop methods for cost-effectively manufacturing full systems, both of which are in progress.”
The Latest on: Artificial photosynthesis
via Google News
The Latest on: Artificial photosynthesis
- New Catalyst Process Recycles Plastic Waste into Useful Materialson January 6, 2021 at 12:37 pm
Scientists have used an innovative catalyst process to recycle a certain kind of plastic for the first time. This plastic is found in everything, such as food packaging, grocery bags¸ wax, liquid ...
- Harnessing the hidden powers of plants could help fix the climateon January 2, 2021 at 11:44 pm
Photosynthesis has been critical to the Earth's survival over billions of years. Now it's time for humans to learn a few tricks from plants ...
- Artificial photosynthesis: The two-in-one technology that could save the planeton December 18, 2020 at 4:00 pm
Alex Reis In a previous life, Alex was a researcher in the University of Newcastle in the field of cell and molecular biology, following a PhD in embryology looking at cow ovaries! After a slight ...
- Artificial Photosynthesis Market Research Report, Growth Trends And Competitive Analysis 2020-2026on December 18, 2020 at 7:20 am
The Artificial Photosynthesis Market provides detailed statistics extracted from a systematic analysis of actual and projected market data for the Artificial Photosynthesis Sector. Global market ...
- Japanese Researchers Pave Way for Artificial Photosynthesison December 17, 2020 at 10:00 am
Unlimited access to our free news articles Unlimited access to our free webinars, white papers, and videos Special offers and discounts on Events and Squared Updates on breaking news and current ...
- Mapping quantum structures with light to unlock their capabilitieson December 3, 2020 at 12:00 pm
A paper on the work is published in Science. Applications include LED lights, solar cells and artificial photosynthesis. “Quantum materials could have an impact way beyond quantum computing ...
- Copper Catalyst Converts Carbonon November 19, 2020 at 3:59 pm
That’s why a discovery by researchers at the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) and Joint Center for Artificial Photosynthesis (JCAP) is so significant.
- Creating fuel from thin air with artificial leaveson October 13, 2020 at 11:52 am
"I really believe that artificial photosynthesis will be one part of that energy portfolio over the next two decades." When plants photosynthesise, they take up water and carbon dioxide ...
- Researchers drive artificial photosynthesis energy conversion rate higheron August 21, 2020 at 5:46 am
Chinese researchers have developed an artificial photosynthetic system with solar-to-fuel conversion efficiency in excess of 20 percent, China Science Daily reported Thursday. Plants transform solar ...
- Generalized strategy for small-molecule-functionalized electrodes exhibitingon August 6, 2020 at 1:37 pm
reactions were carried out in a CEM Discover SP system. UV-vis spectra were recorded on an Agilent Technologies Model 8454 diode-array spectrophotometer. SEM images were taken using a JEOL 6360 LV SEM ...
via Bing News