A new world of flexible, bendable, even stretchable electronics is emerging from research labs to address a wide range of potentially game-changing uses. The common, rigid printed circuit board is slowly being replaced by a thin ribbon of resilient, high-performance electronics.
Over the last few years, one team of chemists and materials scientists has begun exploring military applications in harsh environments for aircraft, explosive devices and even combatants themselves.
Researchers will provide an update on the latest technologies, as well as future research plans, at the 250th National Meeting & Exposition of the American Chemical Society (ACS). ACS is the world’s largest scientific society. The meeting takes place here through Thursday.
“Basically, we are using a hybrid technology that mixes traditional electronics with flexible, high-performance electronics and new 3-D printing technologies,” says Benjamin J. Leever, Ph.D., who is at the Air Force Research Laboratory at Wright-Patterson Air Force Base. “In some cases, we incorporate ‘inks,’ which are based on metals, polymers and organic materials, to tie the system together electronically. With our technology, we can take a razor-thin silicon integrated circuit, a few hundred nanometers thick, and place it on a flexible, bendable or even foldable, plastic-like substrate material,” he says.
To allow electronics to be bendable or stretchable or even change their configuration after fabrication, the Wright-Patterson team has turned to liquid gallium alloys as an electrical interconnect material, Leever says. “While these liquid alloys typically oxidize within minutes and become essentially useless,” he says, “the team has been able to dramatically reduce the effects of the oxidation through the use of ionic species confined to the walls of microvascular channels within the flexible substrates.”
The result is thin, foldable material that allows the circuitry to fit into extremely tight spaces and even to be integrated into complex curved surfaces, such as an airplane’s wing, or even a person’s skin.
In aircraft applications, Leever explains, the hybrid flexible system can be used to monitor stresses and strains and report this information through miniature embedded antennas to ground crews or a pilot.
The researchers also are developing the same approach to monitor pilots’ health. This involves a biosensor system that can measure heartbeat, hydration levels, sweat, temperature and other vital signs through miniature circuitry. The system would be embedded on a flexible, wearable patch and would include an antenna to transmit these biometric signals to the pilot or a ground team. The patch will “breathe,” bend and stretch, and will provide real-time measurements of metrics that indicate fatigue or potential cognitive problems, Leever notes.
Another military application the Air Force is pursuing is use of a flexible hybrid system in “bunker buster” bombs, which detonate after penetrating deep in the earth. Because of the system’s toughness, Leever says, initial testing suggests that the flexible circuitry would remain viable and could detonate the weapon after surviving the initial impact of ground contact after being dropped from aircraft.
In the civilian world, Leever foresees use of flexible systems to monitor the conditions of bridges and other types of infrastructure in real time. He also points to medical applications, such as physical feedback for athletes as they exercise and real-time hospital monitoring for caregivers concerned about changes in a patient’s vital signs. This type of monitoring dispenses with the need for the bulky electrodes and wiring that normally are associated with close medical surveillance.
“Overall, the military has the advantage of being able to move ahead with potentially higher risk research,” he explains. “Commercial investors want a clear demonstration before making an investment. The military can pursue possibly transformational applications at earlier stages if we see a promising approach to realize and advance a technology’s revolutionary potential. When we are successful, the commercial sector directly benefits.”
The Latest on: Flexible electronics
via Google News
The Latest on: Flexible electronics
- EMC Develops Process to Print Transparent Conductors on Flexible Glasson January 14, 2021 at 11:45 am
Energy Materials Corp. (EMC), a company that specializes in the development of high-speed roll-to-roll manufacturing of solar energy panels, has developed an enabling process to print transparent ...
- Energy Materials Corporation Sets World Record for High-Speed, Roll-to-Roll Printing of Conductors on Flexible Glass for Perovskite Solar Panelson January 14, 2021 at 5:38 am
PRNewswire/ -- Energy Materials Corporation (EMC), the global leader in the development of high-speed roll-to-roll manufacturing of high-performance ...
- Flexible Electronics Market Astonishing Growth Along With Tremendous Technology | Samsung Group, LG Groupon January 13, 2021 at 5:25 pm
A consciously conceived and designed business intelligence report titled Global Flexible Electronics market 2020 by Manufacturers, Type, and Application, Forecast to 2030 by MarketResearch.biz ...
- Nanosheet-based electronics could be one drop awayon January 12, 2021 at 1:47 pm
A surprisingly simple method improves 'drop casting' fabrication of tiled nanosheets that could be used in next-generation electronic devices. All you need is a pipette and a hotplate.
- Material for future electronics: New method makes graphene nanoribbons easier to produceon January 10, 2021 at 4:00 pm
Russian researchers have proposed a new method for synthesizing high-quality graphene nanoribbons—a material with potential for applications in flexible electronics, solar cells, LEDs ...
- 3D printing of highly stretchable hydrogel with diverse UV curable polymerson January 8, 2021 at 7:21 am
3 Xi’an Institute of Flexible Electronics and Xi’an Key Laboratory of Biomedical Materials and Engineering, Northwestern Polytechnical University (NPU), Xi’an 710072, Shaanxi, China. 4 Digital ...
- A better pen-and-ink system for drawing flexible circuitson January 6, 2021 at 12:22 pm
“Flexible Electronics Directly Written with an Ultrastable Ballpoint Pen Based on a Graphene Nanosheets/MWCNTs/Carbon Black Nanocomposite” ACS Applied Electronic Materials Conductive ink is a great ...
- A better pen-and-ink system for drawing flexible circuitson January 6, 2021 at 9:19 am
Now, scientists report in ACS Applied Electronic Materials ("Flexible Electronics Directly Written with an Ultrastable Ballpoint Pen Based on a Graphene Nanosheets/MWCNTs/Carbon Black Nanocomposite") ...
- A better pen-and-ink system for drawing flexible circuitson January 6, 2021 at 8:57 am
Flexible electronics are widely used in applications such as biosensors, electronic skin and energy storage. Recent advances to produce such devices include pens that can draw circuits on surfaces ...
- A better pen-and-ink system for drawing flexible circuitson January 5, 2021 at 4:00 pm
Conductive ink is a great tool for printing flexible electronic circuits on surfaces. But these inks can be costly, they do not work on some materials, and devices to apply them can plug up.
via Bing News