A new case study finds the method could reduce an airplane’s weight by 4 to 7 percent
A Northwestern University team has confirmed a new way to help the airline industry save dollars while also saving the environment. And the solution comes in three dimensions. By manufacturing aircrafts’ metal parts with 3-D printing, airlines could save a significant amount of fuel, materials, and other resources.
Led by Eric Masanet, the team used aircraft industry data to complete a case study of the life-cycle environmental effects of using 3-D printing for select metal aircraft parts, a technique that is already being adopted by the industry. The team concluded that 3-D printing the lighter and higher performance parts could significantly reduce both manufacturing waste and the weight of the airplane, thus saving fuel and money and decreasing carbon emissions.
Funded by the US Department of Energy’s Advanced Manufacturing Office, the case study is described in a paper published in the May issue of the Journal of Cleaner Production. Runze Huang, a graduate student in Masanet’s lab, is first author of the paper. Other authors include Matthew Riddle and Diane Graziano from Argonne National Laboratory.
“The airline industry is an early adopter of 3-D printing,” said Masanet, the Morris E. Fine Junior Professor in Materials and Manufacturing at Northwestern’s MCormick School of Engineering. “The main driver is that aircrafts require specialized lightweight metal alloys that can be very costly to process.”
Conventional manufacturing methods tend to be inefficient and wasteful. To produce a 1-kilogram bracket for an airplane, for example, it may require 10 kilograms of raw material input into the manufacturing process. And, from an engineering design perspective, that final bracket may still contain much more metal than is required for the job. 3-D printing, on the other hand, requires far less raw material inputs and can further produce parts that minimize weight through better design.
“We have suboptimal designs because we’re limited by conventional manufacturing,” Masanet said. “When you can make something in layer-by-layer fashion, those constraints diminish.”
Masanet does not anticipate a change to the crucial parts of the aircraft, such as the wings and engine, any time soon. But he does see real potential in the replacement of less flight-critical parts, such as brackets, hinges, seat buckles, and furnishings. According to the case study, 3-D printing a bracket, for example, reduced its weight from 1.09 kilograms to 0.38 kilograms. This might not seem like much, but it adds up.
“There are enough parts that, when replaced, could reduce the weight of the aircraft by 4 to 7 percent,” Masanet said. “And it could be even more as we move forward. This will save a lot of resources and a lot of fuel.”
If the 3-D components evaluated in the case study are used to their full potential, Masanet predicted it would greatly benefit the environment in more than one way. First, his team estimated that airplane fuel consumption could be reduced by as much as 6.4 percent, reducing both fossil fuel dependency and greenhouse gas emissions. Second, their life-cycle analysis found that manufacturing 3-D printed components uses as little as one-third to one-half of the energy currently used in conventional methods. Manufacturers would also potentially save thousands of tons of aluminum, titanium, and nickel that are otherwise scrapped every year.
The Latest on: 3-D Printing
[google_news title=”” keyword=”3-D Printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3-D Printing
- This company is 3D printing meat. Is it sustainable?on November 17, 2022 at 1:30 pm
Steakholder Foods, an Israeli biotech company, has finally answered the question we've all had about 3D printing: yes, you can print a burger. The company has developed a method of printing meat — yes ...
- UAF acquires the only 3D metal printer in the university systemon November 17, 2022 at 10:12 am
The 3D metal printer has aided in productivity and demonstrated varied uses of the items made, from the depths of the ocean to the vacuum of space.
- 3D Printing Medical Devices Market Size is projected to reach USD 9.79 Billion by 2031, growing at a CAGR of 16.1%: Straits Researchon November 17, 2022 at 7:34 am
The global 3D printing medical devices market size was valued at USD 2.55 billion in 2022. It is projected to reach USD 9.79 billion by 2031, growing at a CAGR of 16.1% during the forecast period ...
- 3D-printing microrobots with multiple component modules inside a microfluidic chipon November 17, 2022 at 7:06 am
Scientists from the Department of Mechanical Engineering at Osaka University introduced a method for manufacturing complex microrobots driven by chemical energy using in situ integration. By ...
- Steakholder Foods® Hosts Its First US Tasting Event and Demos Its 3D Cultivated-Meat Printing Technologyon November 17, 2022 at 4:11 am
Attendees were offered the opportunity to 3D print personalized steaks with a choice of three different cuts (entrecote, sirloin, and picanha) and three different fat ratios. The event featured a ...
- Realizing the potential of 3D printingon November 16, 2022 at 2:01 pm
My first visit to a 3D printing lab was back in the fall of 2014. On a trip to Kentucky, I toured a lab at the University of Louisville, where among other things, a team was working with GE Aerospace ...
- Need a Kid Gift? This 3D Printing Pen Is My Favorite Pickon November 16, 2022 at 8:09 am
It's a 3D-printing pen that's safe, smart and eco-friendly. A post shared by CNET (@cnet) Why it's a great gift: It's a bit of an unusual concept, so you may need to watch the video I embedded here to ...
- Can investment in 3D printing technology boost RMG demand?on November 15, 2022 at 8:24 pm
Product designers and innovators use these elements in conjunction with CAD softwares such as CLO 3D and fusion 360 to create a prototype, and then the final version of the product, which is ready for ...
- Stryker Opens New 3D Printing Facility in Irelandon November 15, 2022 at 4:00 pm
Stryker has created 600 high-tech jobs in Ireland this year with the opening of its 3D printing facility in Anngrove, a neighborhood in the city of Cork. The orthopedic device maker has become known ...
- Multi-Nozzle 3D Printing Platform Prints with Sub-Micrometer Precisionon November 15, 2022 at 12:14 pm
Inkjet printing technologies have a few limitations. A new electrostatic 3D printing multi-nozzle design that is agnostic to ink thickness can change that.
via Bing News