3D printing trials of unmanned aircraft at the University of Sheffield broaden the possibilities for this emergent technology
Engineers at the Advanced Manufacturing Research Centre (AMRC) at the University of Sheffield have successfully printed a 1.5m-wide prototype unmanned aerial vehicle (UAV) for a research project looking at 3D printing of complex designs.
The engineers said the polymer craft could form the basis of cheap and potentially disposable UAVs that could be built and deployed in remote situations potentially within as little as 24 hours.
Earlier versions required significant amounts of support material around component parts to prevent the airframe structures from deforming during the build process. Using support material adds a direct material cost, and significantly increases build time, in some cases by an order of magnitude. This is a result of the machine having to change between build and support structure heads after each printed layer.
New 3D printing techniques, such as the fused deposition modelling (FDM) used to make the UAV at Sheffield, could soon be used in the creation of products without the need for complex and expensive tooling and the time required in traditional manufacturing.
The UAV has already completed a test flight as a glider. Researchers are developing an electric ducted fan propulsion system that will be incorporated into the airframe’s central spine. They plan to develop the craft for guidance by GPS or camera technology, controlled by an operator wearing first person-view goggles.
Dr Garth Nicholson who led the project said: “Following successful flight testing, we are working to incorporate blended winglets and twin ducted fan propulsion. We are also investigating full on-board data logging of flight parameters, autonomous operation by GPS, and control by surface morphing technology. Concepts for novel ducted fan designs are also being investigated”.
The Sheffield UAV comprises nine parts that can be snapped together.
It weighs less than 2kg and is made from thermoplastic. The engineers are currently evaluating the potential of nylon as a printing material that would make the UAV 60 per cent stronger with no increase in weight.
The Latest on: 3D printed UAVs
[google_news title=”” keyword=”3D printed UAVs” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printed UAVs
- Frontline drone ‘laboratories’ creating new ways to hurt Vladimir Putin’s forces as Russians and Ukrainians compete for technological superiorityon February 25, 2024 at 6:30 pm
Walking through the drone operators’ base, made of buildings left standing amid the fighting in a village near the town of Siversk in the eastern region of Donetsk, a soldier using the name ...
- Inside a frontline drone ‘laboratory’ creating new ways for Ukraine’s troops to hit Putin’s forceson February 25, 2024 at 1:27 am
As we reach the second anniversary of Russia’s invasion, Askold Krushelnycky meets members of a battalion in eastern Ukraine using 3D-printed explosive casings to build ‘bomber’ drones to take out ...
- US imposes sanctions on zone producing Russian versions of Iranian-made Shahed UAVson February 23, 2024 at 7:54 am
The large-scale sanctions package announced by the United States against Russia includes measures against the Alabuga Special Economic Zone (SEZ), where Russia has established production of its ...
- TerraHaptix Opens Africa’s Largest Drone Factoryon February 21, 2024 at 6:40 am
TerraHaptix, a VC-backed robotics startup opens a 15,000-square-foot drone factory in Abuja to produce autonomous drones for the world’s core industries such as defence, energy, logistics, agric ...
- NATO Allies Warn Drone Advances to Force Strategic Rethinkon February 19, 2024 at 4:05 am
Advances in drone warfare have helped Ukraine partly neutralize Russia’s military advantage two years into the Kremlin-ordered invasion.
- Ocean Alliance Develops New Use for Drones in Whale Research: Non-invasive Taggingon February 13, 2024 at 8:15 am
Snotbot’ creators develop new use for drones in whale research The second in a trilogy of articles on innovative drones for conservation. Explore the first article, on drones saving island ecosystems ...
- CRP Technology launches Windform SLon February 13, 2024 at 6:36 am
In the rapidly evolving field of Additive Manufacturing, the globally leading 3D printing service bureau CRP Technology unveils Windform SL, a groundbreaking material for Powder Bed Fusion/Selective ...
- Global Aerospace 3D Printing Market Size To Worth USD 2180.5 Million By 2033 | CAGR of 15.17%on February 13, 2024 at 4:00 am
The Global Aerospace 3D Printing Market Size was valued at USD 530.9 Million in 2023 and the Worldwide Aerospace 3D Printing Market Size is expected to reach USD 2180.5 Million by 2033, according to a ...
- Blue Bear – Workshop Assistant/Machine Operatoron February 11, 2024 at 3:59 pm
Our 23-year journey has delivered many UK and international ‘firsts’. Key Responsibilities Operate and maintain CNC router, 3D printer, and other machine tools for UAV prototyping. Collaborate with ...
- Army struggles to standardize innovation without stifling iton February 9, 2024 at 10:29 am
Part of the bind, Aliperti argued, is that “it doesn’t seem that there’s a great model of identifying what makes a good innovation officer.” Currently, selections are informal and decentralized, which ...
via Bing News