New materials developed at MIT could lead to actuators on a chip and self-deploying medical devices.
Ceramics are not known for their flexibility: they tend to crack under stress. But researchers from MIT and Singapore have just found a way around that problem — for very tiny objects, at least.
The team has developed a way of making minuscule ceramic objects that are not only flexible, but also have a “memory” for shape: When bent and then heated, they return to their original shapes. The surprising discovery is reported this week in the journal Science, in a paper by MIT graduate student Alan Lai, professor Christopher Schuh, and two collaborators in Singapore.
Shape-memory materials, which can bend and then snap back to their original configurations in response to a temperature change, have been known since the 1950s, explains Schuh, the Danae and Vasilis Salapatas Professor of Metallurgy and head of MIT’s Department of Materials Science and Engineering. “It’s been known in metals, and some polymers,” he says, “but not in ceramics.”
In principle, the molecular structure of ceramics should make shape memory possible, he says — but the materials’ brittleness and propensity for cracking has been a hurdle. “The concept has been there, but it’s never been realized,” Schuh says. “That’s why we were so excited.”
The key to shape-memory ceramics, it turns out, was thinking small.
The team accomplished this in two key ways. First, they created tiny ceramic objects, invisible to the naked eye: “When you make things small, they are more resistant to cracking,” Schuh says. Then, the researchers concentrated on making the individual crystal grains span the entire small-scale structure, removing the crystal-grain boundaries where cracks are most likely to occur.
Those tactics resulted in tiny samples of ceramic material — samples with deformability equivalent to about 7 percent of their size. “Most things can only deform about 1 percent,” Lai says, adding that normal ceramics can’t even bend that much without cracking.
David Dunand, a professor of materials science and engineering at Northwestern University, says the MIT team “achieved something that was widely considered impossible,” finding “a clever solution, based on fundamental materials-science principles, to the Achilles’ heel of ceramics and other brittle materials.”
“Usually if you bend a ceramic by 1 percent, it will shatter,” Schuh says. But these tiny filaments, with a diameter of just 1 micrometer — one millionth of a meter — can be bent by 7 to 8 percent repeatedly without any cracking, he says.
While a micrometer is pretty tiny by most standards, it’s actually not so small in the world of nanotechnology. “It’s large compared to a lot of what nanotech people work on,” Lai says. As such, these materials could be important tools for those developing micro- and nanodevices, such as for biomedical applications. For example, shape-memory ceramics could be used as microactuators to trigger actions within such devices — such as the release of drugs from tiny implants.
Compared to the materials currently used in microactuators, Schuh says, the strength of the ceramic would allow it to exert a stronger push in a microdevice. “Microactuation is something we think this might be very good for,” he says, because the ceramic material has “the ability to push things with a lot of force — the highest on record” for its size.
The Latest Bing News on:
- Magnesium Oxide Market Size to Be Worth USD 8.43 Growing at 3.9% CAGR Till 2027; Industry Revenue, Statistics, Forecast by Reports and Dataon January 15, 2021 at 10:30 am
A considerable amount is used across the ceramic and glass manufacturing as well as in steel industries to provide a refractory layer. Market Drivers The need for ensuring the safety of reactors ...
- 4D Printing in Healthcare Market To Garner USD 30.4 Million, At a CAGR of 29.4% by 2025on January 4, 2021 at 10:03 pm
D Printing in Healthcare Market Overview The global 4D Printing in Healthcare Market 2020 is expected to register a CAGR ...
- Smart Materials: Looking for Problems to Solveon January 4, 2021 at 4:00 pm
The category encompasses solids and liquids, as well as polymers, alloys, ceramics, composites, and nanomaterials. Smart materials range from the piezoceramics in inkjet printers to shape-memory ...
- ADAPT Consortium Develops Shape Memory Alloys Suitable for Additive Manufacturing Processeson December 26, 2020 at 4:00 pm
Shape memory alloys (SMAs) are one of those materials that haven’t found their way in AM to date. SMAs are materials that can be deformed at low temperatures, then recover their original shape upon ...
- New IDTechEx Report Documents a Turning Point in the $3.6bn Haptics Industryon December 17, 2020 at 9:08 am
to other technologies such as piezoelectric actuators (ceramic, composite, and polymer-based), shape memory alloys, microfluidics, electrostatic systems, and several other niche or emerging systems.
- On your radar: A real-life guide to Batman’s techon December 11, 2020 at 7:00 am
Efforts are on to create fabric from carbon nanotube and ceramic fibres ... but scientists have developed electroactive Shape Memory Polymers and Shape Memory Alloys that rely on heat and other ...
- Matsurf Technologies Incon August 12, 2019 at 11:54 pm
as well as high quality Ti alloy and Nitinol shape memory alloy bar, plate, tube, and wire for medical, dental, and other industries application. We also provide vacuum hot pressing (HP), hot ...
- Advanced Materials Lab Research Imageson December 21, 2018 at 7:24 am
Fully-dense 3-D printed ceramic turbine vane. The SiOC vane was printed via Stereolithography followed by pyrolysis in argon at 1000°C. Confocal Microscopy image of ...
- Failure of Structural Biomaterialson September 11, 2018 at 5:40 pm
The case of mother of pearl (nacre) from seashell is an excellent example. Mostly made of microscopic tablets of aragonite (a ceramic as fragile as chalk), nacre is orders of magnitude more fracture ...
- Chapter 11: Martensitic Transformationon May 1, 2018 at 6:30 am
An equivalent ceramic not undergoing martensitic transformation would have a toughness less than or equal to 3 MPa m 1/2. An additional, and very important, effect associated with martensitic ...
The Latest Google Headlines on:
The Latest Bing News on:
Self-deploying medical devices
- Operations at the Point of Embarkationon August 17, 2020 at 4:31 am
5. Assist in servicing self-deploying aircraft to include air traffic control, fire protection, fueling/defueling, and dissassembly. Assist the aircraft maintenance teams in preparing, storing ...
- THE AIR ASSAULT (AASLT) DIVISIONon July 25, 2014 at 8:22 pm
Three forward support battalions (FSBS) (to provide medical, supply ... rapid deployment to the theater of war by airlift and/or self-deploying Army aviation. By forced entry into the theater ...